Download PDF

3405FRM-BNC, 3405FRM-DIN

Miniature Fiber Optic SFP BNC/DIN Frame

Product ManualManual
  • VistaLINK® enabled

The Evertz 3405FRM is a miniature optical conversion platform. The 3505FRM can accommodate one of any Evertz 3405 series SFP, allowing the use of optical transmit, receive, regenerator or electrical distribution amplifier or changeover SFP's. Benefits of fiber optics for video transport include longer attainable distances, smaller/lighter cabling, reduced cable tray loads and electrical isolation. The 3405FRM provides an extremely compact, low-overhead means for simple electrical/optical conversion for interfacility transport, as well as overcoming the limitations imposed by coaxial cable in intra-facility applications.

3405 series SFP's are able to handle ASI, SDI, HD-SDI and 3G digital video signals, as well as other signal rates up to 3 Gig on non-reclocked versions (e.g. MADI). The SFP modules are hot-swappable, allowing for quick servicing or easy reconfiguration or expansion at any time.

See Evertz list of available optical and coaxial 3405 Series SPF modules.

Features
  • Versatile, miniature "throwdown" type enclosure can be used for low-signal count permanent or ad-hoc applications.
  • "Keyhole" and zip-tie mounting provisions.
  • Any 3405SFP types may be installed, including optical transmit, receive, regenerator and electrical distribution amplifier and changeover switches.
  • Quad electrical connectors per SFP facilitates extra electrical distribution
  • The 3405FRM-BNC provides two coaxial connections, while the 3405FRMDIN provides four connections on DIN1.0/2.3 connectors for additional signal distribution.
Block DiagramBlock Diagram

Specifications

System
DensitySingle SFP
Electrical Inputs
Connector
3405FRM-BNCBNC per IEC 61169-8 Annex A
3405FRM-DIN1.0/2.3 Female connector
Impedance75Ω
Physical
Dimensions1.03"H x 1.43"W x 2.37"D
Module Capacity1 Evertz® SFP modules. Dual TX or Dual RX
Operating Temp0-40°C
Electrical
Power Supply ConfigurationSingle external supply (VSHEG42-120300-7)
VoltageDC Input 12V DC (external power supplies required for 110-220V)
Max Power Consumption2 watts (fully loaded frame)
Note: power consumption dependent on SFP type
Compliance
SafetyCSA Listed, Complies with EU Safety Directive
EMCComplies with FCC part 15, Class A
Complies with EU EMC Directives
VSHEG42-120300-7 External Power Supply Brick
AC Mains InputAuto ranging, 100 ⇔ 240V AC, 50/60Hz
Number of Outputs1
Output Voltage12V DC
Output ConnectorCoaxial power connector
Maximum Power Dissipation36 watts
Status IndicatorsGreen OK LED
Connector
PowerCoaxial power connector
Status IndicatorsPSU status LEDs
Fuses0.5A, time delay

Ordering Information

NotesSFP's sold separately, please specify at the time of ordering.
3405FRM-BNCMiniature Fiber Optic SFP BNC frame (does not include SFP's)
3405FRM-DINMiniature Fiber Optic SFP DIN frame (does not include SFP's)
Evertz® SFP Modules
3405 CoaxialCoaxial Distribution Amplifier and Auto-Changeover SFP's
3405 OpticalOptical Transmitter, Receiver and Regenerator SFP's