7700PTX
Universal Protocol Translator
The 7700PTX Universal Protocol Translator module provides the ability for Evertz VistaLINK® and MVP® software to interface directly to third party UMD devices and routers.
The 7700PTX communicates with the router and UMD protocols either via one of four serial ports or using a built in Ethernet port. All ports both serial and Ethernet are bi-directional allowing the device complete flexibility for communication. The 7700PTX is equipped with 20 general purpose inputs and 8 general purpose outputs that can be used to connect to third party devices for the purpose of alarming or tally. A single LTC port allows the 7700PTX to connect to external time of day references.
Features
- 4 serial ports RS232/422 selectable
- 20 opto-isolated General Purpose inputs (GPI)
- Selectable +5V or +12V supply for driving GPI over longer cable runs
- 8 relay closure General Purpose Interface outputs (GPO)
- GPI/GPO easily accessed through pin-headers (2x6 Phoenix Terminal Blocks) on rear plate
|
- 1 LTC input for module synchronization of fault alarms to facility time
- Modular, conveniently fits into 7700FR-C 3RU frame
- Module status LED and 20 GPI LEDs for simple GPI input diagnostics
- Frame status trigger
- VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO)
|
PTX Supported Protocols
| Model | Description |
|---|
|
For router protocols not listed here please contact the factory. |
| 7700PTX-MVP | Image Video, TSL, Leitch UDT5700, and GPI/O protocol support |
|---|
| 7700PTX-SX | Miranda PressMaster protocol support |
|---|
| 7700PTX-XY | Leitch XY Integrator protocol support |
|---|
| 7700PTX-CTP | Contribution Tally Protocol support (GVG Switcher, Ross Switcher) |
|---|
| 7700PTX-10XL | GVG 10XL protocol support for router control |
|---|
| 7700PTX-D28 | Datatek D2800 protocol support for router control |
|---|
| 7700PTX-D20 | Datatek D2000 protocol support for router control |
|---|
| 7700PTX-RCL | Router Control Language protocol (GVG Encore) for router control |
|---|
| 7700PTX-NV | Nvision router and server protocol support for router control |
|---|
| 7700PTX-VMSI | VMSI protocol support (GVG Jupiter) for router control |
|---|
| 7700PTX-AP | Andromeda UMD/tally protocol support (GVG ASCII plus) for router control |
|---|
| 7700PTX-PESA | Pesa router protocol support for router control |
|---|
| 7700PTX-QUTZ | Quartz router protocol support for router control |
|---|
| 7700PTX-PB | Pro-Bel UMD interface supports SW-P-04 (UMD) & SW-P-06 (Encapsulation) |
|---|
| 7700PTX-MVS | Sony MVS series switcher interface for tally |
|---|
| 7700PTX-STP | Sony DVS series switcher interface for tally |
|---|
Specifications
| Number of Inputs | 20 |
|---|
| Type | Opto-isolated, active low with jumper selectable +5V or +12V supplied voltage |
|---|
| Connector | Phoenix Terminal Block |
|---|
| Signal Level | Jumper selectable +5V or +12V |
|---|
| Number of Inputs | 8 |
|---|
| Type | "Dry Contact" relay closure |
|---|
| Connector | 2 pins per output on Phoenix Terminal Block |
|---|
| Signal Level | Normally closed and normally open |
|---|
| Number of Inputs | 1 ± pair |
|---|
| Type | Balanced |
|---|
| Level | 0.2V to 4V p-p balanced or unbalanced |
|---|
| Connector | Phoenix Terminal Block pins |
|---|
| Number of Ports | 4 RS-232 or 3 RS-422 (jumper selectable) |
|---|
| Connector | Phoenix Terminal Block pins |
|---|
| Baud Rate | Up to 1Mbaud |
|---|
| Voltage | +12V DC |
|---|
| Power | < 6 Watts |
|---|
| Safety | ETL Listed, Complies with EU Safety Directive |
|---|
| EMI/RFI | Complies with FCC Part 15 Class A, EU EMC Directive |
|---|
Ordering Information
| 7700PTX-MVP | PTX which drives UMDs |
|---|
| 7700PTX-SX | PTX which interfaces with Miranda Press Station |
|---|
| 7700PTX-XY | PTX which interfaces with Leitch-XY integrator |
|---|
| 7700PTX-CTP | PTX which interfaces with Ross switcher |
|---|
| 7700PTX-10XL | PTX which controls 10XL-based routers |
|---|
| 7700PTX-D28 | PTX which controls Datatek D-2800 protocol support |
|---|
| 7700PTX-D20 | PTX which controls Datatek D-2000 protocol support |
|---|
| 7700PTX-RCL | PTX which controls GVG RCL protocol support |
|---|
| 7700PTX-NV | PTX which controls NVISION protocol support |
|---|
| 7700PTX-VMSI | PTX which controls VMSI protocol support |
|---|
| 7700PTX-AP | PTX which controls UMD/tally protocol support |
|---|
| 7700PTX-PESA | PTX which controls Pesa protocol support |
|---|
| 7700PTX-QUTZ | PTX which controls Quartz protocol support |
|---|
| 7700PTX-PB | Pro-Bel UMD interface supports SW-P-04 (UMD) & SW-P-06 (Encapsulation) |
|---|
| 7700PTX-MVS | Sony MVS series switcher interface for tally |
|---|
| 7700PTX-STP | Sony DVS series switcher interface for tally |
|---|
| Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
|---|
| Rear Plate Suffix |
|---|
| +3RU | 3RU rear plate for use with 7700FR-C or 350FR Multiframe |
|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
|---|
| +SA | Standalone Enclosure Rear Plate |
|---|
| 350FR | Portable Multiframe which holds 7 modules |
|---|
| 7700FR-C | 3RU Multiframe which holds 15 modules |
|---|
| 7701FR | 1RU Multiframe which holds 3 modules |
|---|
| S7701FR | 7700 Series Standalone Enclosure |
|---|
Download PDF
