Download PDF

7700R-SC-BRC

System Controllers

  • VistaLINK® enabled

The 7700R-SC-BRC System Controller provides 3rd party interfacing to Evertz routers and control systems. With its Ethernet networking and comprehensive interface connections, the 7700R-SC-BRC provides a platform to manage 3rd party communication and interface requirements for routing systems. The module is designed to allow bi-directional (where required) communication between Evertz routers and control systems and 3rd party systems (like 3rd party router controllers, 3rd party routers, automation systems, production switchers etc), and can be configured to allow Evertz to control 3rd party devices and/or to allow 3rd party devices to control us. Name data for router control system (often referred to as mnemonics) can be transferred from Evertz router control systems into the 7700R-SC-BRC and are available to 3rd party systems using a protocol that supports mnemonic transfer.

SNMP monitoring support via VLPRO allows efficient monitoring and configuration of the 7700R-SC-BRC system controller.

The 7700R-SC-BRC is a 2 slot module and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Features

  • 3rd party control can be via serial or TCP/IP as determined by protocol choice
  • Evertz control can be via serial or TCP/IP as determined by protocol choice
  • Can allow control of 3rd party devices or can allow control of Evertz routers/control system from 3rd party
  • Fast boot-up time
  • NVRAM for crosspoint status storage
  • Three serial ports (RS-232/RS-422 selectable)
  • Ethernet port supporting TCP/IP protocol for configuration and router control
  • Not all protocols may be displayed here, please contact your Evertz Sales representative with any questions
Third Party Control of Evertz routers/Magnum control system
ProductProtocolFormat
Snell kahuna production switcherNatively supports Quartz protocol, no 7700R-SC-BRC requiredSerial
Avid capture managerGVG-RCLBoth
Sony MVS-8000 production switcherSony ROT16 (SONY HKSP-R80 to convert S-BUS to ROT16 required)Ethernet
Wheatstone audio consoleNatively supports Quartz protocol, no 7700R-SC-BRC requiredSerial
Thompson GVG Kalypso production switcherSMS7000 (GVNP - Grass Valley native protocol)Both
Ross production switchersProbel SW-P-08Both
Ross production switchersProbel SW-P-02Both
Thompson GVG Encore router controllerGVG-RCLBoth
Pesa 3500Pro router controllerPESA CPU Link protocol 1Serial
Phillips/BTS/Jupiter (GVG)
VM3000/CM4000 router controller
Phillips/BTS ESControlSerial
Phillips/BTS/Jupiter (GVG)Phillips/BTS ES SwitchSerial
NVision NV9000 router controllerNVision NVEPEthernet
Image Video TSI-1000 tally/UMD managerNatively supports Quartz protocol, no 7700R-SC-BRC requiredBoth
AMX/CrestronNatively supports Quartz protocol, no 7700R-SC-BRC requiredBoth
VSM router control systemNatively supports Quartz protocol, no 7700R-SC-BRC requiredEthernet
BNCS control systemNatively supports Quartz protocol, no 7700R-SC-BRC requiredEthernet
Miranda PCS SystemNatively supports Quartz protocol, no 7700R-SC-BRC requiredSerial
Harmonic NMX control systemProbel SW-P-02Both
Evertz Control of Third Party Devices/Routers
ProductProtocolFormat
Pesa routers/router controllersPESA CPU Link protocol 1Serial
Phillips/BTS/GVG routers connected to a VM3000Phillips/BTS VMSI ASCIISerial
Phillips/BTS/GVG routers connected to a CM4000Phillips/BTS VMSI ASCIISerial
NVision routers supporting serialNVision NVSPSerial
NVision routers supporting ethernetNVision NVEPEthernet
NVision routers slaved to an NV9000NVision NV9000Ethernet
Legacy Sony routersSony Remote 2 protocolSerial
Legacy Sony routersSony CART++Serial
GVG routersPhillips/BTS ESControlSerial
GVG routersPhillips/BTS ES SwitchSerial
GVG routers connected via SMS7000SMS7000 (GVNP - Grass Valley native protocol)Both
GVG routers via EncoreGVG-RCLBoth
Probel routersProbel SW-P-08Both
Probel routersProbel SW-P-02Both
Utah routersRCP3Both
Leitch routersXY protocolBoth
Stagetec Nexus routersMatrix5Both
LAWO routersLAWO (RemoteMNOPL)Ethernet
Sony MVS-8000 production switcherSony ROT16 (SONY HKSP-R80 to convert S-BUS to ROT16 required)Ethernet
Automation/MAM/CAM Systems control of Evertz Routers
ProductProtocolFormat
NverzionNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Harris D SeriesNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Harris ADC (Louth)Natively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Avid (Sundance)Natively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Omnibus (colossus and ITX)Natively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Avid Capture ManagerNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
ProbelNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
FloricalNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
AbitNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
CrispinNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
DaletNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
DNF ControlsNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Pebble BeachNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
PharosNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
Digital RapidsNatively supports Quartz protocol, no 7700R-SC-BRC requiredEthernet
IbisProbel SW-P-02Serial
Primestream/Building4MediaNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
AvecoNatively supports Quartz protocol, no 7700R-SC-BRC requiredContact Vendor
S4M VP MS Ingest AutomationPhillips/BTS VMSI ASCIISerial
Block DiagramBlock Diagram

Specifications

ConnectorRJ45 10/100Mb
Ports2
Serial Ports
Number of Ports3 RS-232/422
ConnectorFemale DB25

Ordering Information

7700R-SC-BRCSystem Controller, single processor
Ordering Options
NotesRear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
+3RU3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes
Enclosures
350FRPortable Multiframe which holds 7 single slot modules
7700FR-C3RU Multiframe which holds 15 single slot modules
7800FR3RU Multiframe which holds 15 single slot modules
7701FR1RU Multiframe which holds 3 single slot modules
S7701FR7700 Series Standalone Enclosure