Download PDF

7705OE-3

Triple SDI Optical to Electrical Converter 19.4Mb/s or 143-540Mb/s

Product ManualManual
Features
  • Triple SDI optical to electrical converter for 3 independent channels
  • Provides 45 independent channels of optical conversion, in a single 3RU frame
  • Supports all SMPTEST 259 standards with operation from 143Mb/s - 360Mb/s
  • Supports additional standards of SMPTEST 305 (SDTi), SMPTE ST ST 310 (19.4Mb/s), SMPTE344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
  • Supports multi-mode or single-mode fiber
  • Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
  • Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
  • Inputs
  • Three independent fiber inputs
  • 1270nm to 1610nm input wavelength range
  • Input sensitivity to -30dBm
  • SC/PC, ST/PC, FC/PC connector options
  • Outputs
  • Three independent, reclocked, serial digital BNC outputs
  • Wideband jitter < 0.2UI
  • Card Edge LED's
  • Signal presence indication for each channel
  • Input carrier weak indication for each channel
  • Module status indication
Block DiagramBlock Diagram

Specifications

Optical Input
Number of Inputs3 (independent channels)
ConnectorSC/PC, ST/PC, FC/PC female housing
Operating Wavelength1270nm to 1610nm
Maximum Input Power0dBm
Optical Sensitivity-30dBm
Serial Video Output
StandardSMPTE ST 259 A, B, C, D, SMPTE ST 297, SMPTE ST 305, SMPTE ST 310, SMPTE ST 344, M2S, DVB-ASI
Number of Outputs3 reclocked (independent channels)
ConnectorBNC per IEC 61169-8 Annex A
Signal Level800mV nominal
DC Offset0V ±0.5V
Rise/Fall Time900ps nominal
Overshoot< 10% of amplitude
Return Loss> 15dB up to 540Mb/s
Wideband Jitter< 0.2UI
Electrical
Voltage+12V DC
Power6 Watts
EMI/RFIComplies with FCC Part 15 Class A, EU EMC Directive
Physical
Number of Slots1

Ordering Information

7705OE-3Triple SDI Optical to Electrical Converter 19.4Mb/s or 143-540Mb/s
Ordering Options
NotesRear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SCSC/PC
+STST/PC
+FCFC/PC
Rear Plate Suffix
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
+3RU3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes
Enclosures
350FRPortable Multiframe which holds 7 single slot modules
7700FR-C3RU Multiframe which holds 15 single slot modules
7800FR3RU Multiframe which holds 15 single slot modules
7701FR1RU Multiframe which holds 3 single slot modules
S7701FR7700 Series Standalone Enclosure
Patch Cable
CB-FP1M-SCPCSingle mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPCSingle mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPCSingle mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPCSingle mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPCSingle mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPCSingle mode fiber cable, 10m, ST/PC male termination