Evertz Microsystems Ltd.

Download PDF

7707CVDTA-A4

Analog Video, 4-Channel Audio and RS-232 / 422 Fiber Transmitter

VistaLINK® enabled

The 7707CVDTA-A4 is a VistaLINK® - capable composite analog video, 4-channel audio and bi-directional RS-232/422 fiber optic transmitter for broadcast quality video signals.

The 7707CVDTA-A4 is backwards compatible with previous 7707CVDT-A4 versions.

The 7707CVDTA-A4 is ideal for analog VTR link extension or camera PTZ applications.

The 7707CVDTA-A4 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Features
  • Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
  • Supports both NTSC and PAL video signals
  • Broadcast quality analog video and audio performance
  • 2 bi-directional RS-232 or 1 bi-directional RS-422
  • Superior digital data transmission
  • Signal transport over fiber uninterrupted by loss of input video, audio or data feeds
  • Adjustable gain equalization for up to 300m of Belden 1694A coaxial cable
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
    • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
    • Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
    • Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
    • DWDM wavelengths (ITU-T G.694.1 compliant) also available
Block Diagram Block Diagram

Specifications

Analog Video Input
StandardsNTSC, SMPTE ST 170, PAL, ITU-R 624-4
Number of Inputs1
ConnectorBNC per IEC 61169-8 Annex A
Signal Quantization12 bits
System Bandwidth5.5MHz
Input Level2V p-p (Maximum)
Gain EqualizationUp to 300m of Belden 1694A or equivalent (adjustable)
Input impedance75Ω
Return Loss> 30dB to 5.5MHz
Analog Video Outputs(Not available on -F2 versions)
StandardNTSC, SMPTE ST 170, PAL, ITU-R 624-4
Number of Outputs1 buffered version of input
ConnectorBNC per IEC 61169-8 Annex A
Output Level1V p-p
Output Impedance75Ω
Return Loss> 30dB to 5.5MHz
Analog Audio Inputs
Number of Inputs4
TypeBalanced analog audio
Connector12-pin removable terminal block
Input impedanceHigh Impedance (> 20kΩ)
Max. Audio Input Level+24dBu
Signal Quantization24 Bits
Freq. Response±0.1dB, 20Hz to 20kHz
Serial Data Ports
Number of Ports1 RS-422 or 2 RS-232 - Jumper Selectable
Connector4 pins (plus ground) on 16-pin removable terminal block
Baud RateUp to 3Mb/s (Determined by incoming data)
Optical Input
Number of Inputs1
ConnectorFemale SC/PC, ST/PC, FC/PC
Operating Wavelength1270nm to 1610nm
Max. Input Power0dBm
Optical Sensitivity
WDM (-W Version)-26dBm
Standard-28dBm
Optical Output
Number of Outputs1
ConnectorFemale SC/PC, ST/PC or FC/PC
Return Loss> 14dB
Rise and Fall Time200ps nominal
Fiber Size9µm core/125µm overall
Wavelength
Standard1310nm, 1550nm
CWDM1270nm - 1610nm
DWDMC-Band (ITU-T G.694.1 compliant)
Output Power
1310nm FP-7dBm ±1dBm
1550nm (-W)-1dBm ±1dBm
1550nm, CWDM DFB0dBm ±1dBm
DWDM DFB+7dBm ±1dBm
System Performance(7707CVDTA-A4 + 7707CVDRA-A4)
Video Input to Video Output Delay< 10µs
Audio Input to Audio Output Delay< 1.9ms
Electrical
Voltage+12V DC
Power12 Watts (Non-DWDM), 15 Watts (DWDM)
Physical
Number of slots1
Compliance
Laser SafetyClass 1 laser product
Complies with 24 CFR 1040.10 and 1040.11
IEC 60825-1
EMI/RFIComplies with FCC Part 15, Class A
EU EMC directive

Ordering Information

Analog Video + Audio + Bi-di RS-232/422 Fiber Transmitter
7707CVDTA13-A4-F2Dual fiber, 1310nm TX & RX
7707CVDTA15-A4-WSingle fiber, 1550nm TX, RX on 1310nm
CWDM & DWDM (Ordering Information)
7707CVDTAxx-A4-F2Dual fiber, CWDM Laser
7707CVDTADxxx-A4-F2Dual fiber, DWDM Laser
Ordering Options
Notes• Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SCSC/PC
+STST/PC
+FCFC/PC
Rear Plate Suffix
+3RU3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
Enclosures
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU Multiframe which holds 15 modules
7800FR3RU Multiframe which holds 15 modules
7701FR1RU Multiframe which holds 3 modules
S7701FR7700 Series Standalone Enclosure
Patch Cable
CB-FP1M-SCPCSingle mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPCSingle mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPCSingle mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPCSingle mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPCSingle mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPCSingle mode fiber cable, 10m, ST/PC male termination
About Us | Contact | Support © 2012 Evertz Microsystems, Ltd. All rights reserved webmaster@evertz.com