Evertz Microsystems Ltd.

Download PDF

7707CVT-4 & 7707CVT-4-A16

Quad Analog Video and 16 Channel Analog Audio Fiber Transmitter

VistaLINK® enabled

The 7707CVT-4 and 7707CVT-4-A16 are VistaLINK® - capable, composite analog video fiber transmitters for broadcast analog video and 16 analog audio signals. These card modules accept up to four NTSC or PAL analog video inputs and 16 analog audio, performs analog to digital conversion and transmits them over a single fiber. The companion 7707CVR-4 and 7707CVR-4-A16 Fiber Receivers demultiplex the signals and convert them back to analog form.

The fiber optic output of these modules is available in an assortment of optical wavelengths, accommodating 1310nm, 1550nm, CWDM and DWDM transmission schemes.

The 7707CVT-4 occupies a single slot whereas the 7707CVT-4-A16 occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Features
  • Single card fiber optic transmitter for up to four analog video and 16 analog audio signals
  • Supports both NTSC and PAL video signals
  • Broadcast quality analog video and audio performance
  • Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
  • Signal transport over fiber is uninterrupted by loss of input video feeds
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
  • Supports single-mode and multi-mode fiber optic cable
    • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
    • Adjustable equalization for up to 250m of Belden 1694A coaxial cable
    • Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
    • Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
    • DWDM wavelengths (ITU-T G.694.1 compliant) also available
Block Diagram Block Diagram

Specifications

Analog Video Input
StandardsNTSC, SMPTE ST 170, PAL, ITU-R 624-4
Number of Inputs4
ConnectorBNC per IEC 61169-8 Annex A
Signal Quantization12 bits
System Bandwidth5.5MHz
Input Level2V p-p (Maximum)
Gain Equalizationup to 250m of Belden 1694A or equivalent (adjustable)
Input impedance75Ω
Return Loss> 30dB to 5.5MHz
Signal/Noise Ratio> 70dB
Differential Gain< 1.0%
Differential Phase< 0.7°
Passband Ripple
NTSC< ±0.1dB to 4.1MHz
< ±0.2dB to 5.5MHz
PAL< ±0.1dB to 4.8MHz
< ±0.2dB to 5.8MHz
Chroma/Luma Gain98% to 103%
Chroma/Luma Delay
NTSC< 5ns
PAL< 12ns
Line Time Distortion1.2%
Analog Audio Inputs7707CVT-4-A16
Number of Inputs16
TypeBalanced analog audio
Connector48-pin removable terminal block
Input impedanceHigh Impedance (> 20kΩ
Freq. Response±0.1dB, 20Hz to 20kHz
THD 20Hz-20kHz< 0.005%
Channel Phase Diff.±1°
SNR (weighted)> 85dB
Max. Audio Input Level+24dBu
Signal Quantization24 Bits
Optical Outputs
Number of Outputs1
ConnectorFemale SC/PC, ST/PC or FC/PC
Return Loss> 14dB
Wavelengths
Standard1310nm, 1550nm (nominal)
CWDMSee Ordering Information
DWDMSee Ordering Information
Output Power
1310nm FP (Standard)-7dBm ±1dBm
1550nm & CWDM DFB0dBm ±1dBm
DWDM DFB7dBm ±1dBm
Electrical
Voltage+12V DC
Power11/12 Watts (Non-DWDM)
13/14W (DWDM)
Physical
Number of slots1 (7707CVT-4) or 2 (7707CVT-4-A16)
Compliance
Laser SafetyClass 1 laser product
Complies with 24 CFR 1040.10 and 1040.11 IEC 60825-1
EMI/RFIComplies with FCC Part 15, Class A
EU EMC directive

Ordering Information

7707CVT13-4Quad Analog Video Fiber Transmitter, 1310nm FP Laser
7707CVT15-4Quad Analog Video Fiber Transmitter, 1550nm DFB Laser
7707CVT13-4-A16Quad Analog Video, 16 Analog Audio Fiber Transmitter 1310nm FP Laser
7707CVT15-4-A16Quad Analog Video, 16 Analog Audio Fiber Transmitter 1550nm DFB Laser
CWDM (Ordering Information)
7707CVTxx-4Quad Analog Video Fiber Transmitter CWDM DFB Laser
7707CVTxx-4-A16Quad Analog Video, 16 Analog Audio Fiber Transmitter CWDM DFB Laser
DWDM (Ordering Information)
7707CVTDxxx-4Quad Analog Video Fiber Transmitter DWDM DFB Laser
7707CVTDxxx-4-A16Quad Analog Video, 16 Analog Audio Fiber Transmitter DWDM DFB Laser
Ordering Options
Notes• Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SCSC/PC
+STST/PC
+FCFC/PC
Rear Plate Suffix
+3RU3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
Enclosures
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU Multiframe which holds 15 modules
7800FR3RU Multiframe which holds 15 modules
7701FR1RU Multiframe which holds 3 modules
S7701FR7700 Series Standalone Enclosure
Patch Cable
CB-FP1M-SCPCSingle mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPCSingle mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPCSingle mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPCSingle mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPCSingle mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPCSingle mode fiber cable, 10m, ST/PC male termination