Evertz - 7707EO-HD - HD Electrical to Optical Converter, 19.4Mb/s to 1.5Gb/s

7707EO-HD

Supports all SMPTE ST 292-1 standards at 1.485Gb/s
Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
Supports SMPTE ST 310 (19.4Mb/s), M2S or DVB-ASI (270Mb/s), SMPTE ST 344 (540Mb/s), and SMPTE ST 305 (SDTi) rates
Auto rate selection, indication and reclocking for all SDI and HD-SDI data rates from 143Mb/s to 1.485Gb/s
Selectable non reclock mode for other data rates
Detection and display of equalization strength, video format, and EDH errors (SDI only)
Automatic coaxial input equalization to 150m for all rates to 1.485Gb/s (Belden 1694A)
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports multi-mode and single-mode fiber

- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Serial Video Input
Standard
Reclocked	SMPTE ST 292-1, ST 259 A, B, C, D, 344, ST 310, ST 305, M2S or DVB-ASI
Non-Reclocked	Any bi-level signal type at rates of 19.4Mb/s to 1.485Gb/s
Number of Inputs	1
Connector	BNC per IEC 61169-8 Annex A
Equalization	Automatic to 150m @ 1.485Gb/s with Belden 1694A or equivalent cable
Return Loss	> 15dB to 1.5GHz

Optical Output
Standard	SMPTE ST 297
Number of Outputs	1
Connector	SC/PC, ST/PC, FC/PC female housing
Return Loss	> 14dB
Rise/Fall Time	< 270ps
Wideband Jitter	< 0.2UI reclocked
Wavelength	See ordering information
CWDM Wavelength	1270nm to 1610nm (See Ordering Info)
Optical Power
1310nm FP	-7dBm ±1dBm
1550nm, CWDM DFB	0dBm ±1dBm
DWDM DFB	+7dBm ±1dBm

Electrical
Voltage	+12V DC
Power	8 Watts (non-DWDM) or 11 Watts (DWDM)

Physical
Number of Slots	1

Compliance
Laser Safety	Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
EMI/RFI	Complies with FCC Part 15, Class A, EU EMC Directive

HD Electrical to Optical Converter
7707EO13-HD	1310nm FP laser
7707EO15-HD	1550nm DFB laser

CWDM & DWDM (Ordering Information)
7707EOxx-HD	CWDM DFB laser
7707EODxxx-HD	DWDM DFB laser

Ordering Options
Notes	• Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU

Rear Plate Suffix
+3RU	3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
+1RU	1RU rear plate for use with 7701FR Multiframe
+SA	Standalone Enclosure Rear Plate

Enclosures
350FR	Portable Multiframe which holds 7 modules
7700FR-C	3RU Multiframe which holds 15 modules
7800FR	3RU Multiframe which holds 15 modules
7701FR	1RU Multiframe which holds 3 modules
S7701FR	7700 Series Standalone Enclosure

Patch Cable
CB-FP1M-SCPC	Single mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPC	Single mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPC	Single mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPC	Single mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPC	Single mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPC	Single mode fiber cable, 10m, ST/PC male termination