Evertz Microsystems Ltd.

Download PDF

7707OE-HD

HD Optical to Electrical Converter, 19.4Mb/s to 1.5Gb/s

VistaLINK® enabled
Features
  • Supports all SMPTE ST 292-1 standards at 1.485Gb/s
  • Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
  • Supports SMPTE ST 310 (19.4Mb/s), M2S or DVB-ASI (270Mb/s), SMPTE ST 344 (540Mb/s), and SMPTE ST 305 (SDTi) rates
  • Auto rate selection, indication and reclocking for all SDI and HD-SDI data rates from 143Mb/s to 1.485Gb/s
  • Selectable non-reclock mode for other rates
  • Detection and display of optical input power, video format, and EDH errors (SDI only)
  • Display of received optical power for continuous indication of link integrity
  • Wide range optical input (1270nm - 1610nm)
  • Supports single-mode and multi-mode fiber optic cable
  • Fully hot swappable from front of frame
    • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
    • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
    • Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Block Diagram Block Diagram

Specifications

Optical Input
Standard
ReclockedSMPTE ST 292-1, ST 259 A, B, C, D, 344, ST 310, ST 305, M2S or DVB-ASI
Non-ReclockedAny bi-level signal type at rates of 19.4Mb/s to 1.485Gb/s
Number of Inputs1
ConnectorSC/PC, ST/PC, FC/PC female housing
Operating Wavelength1270nm to 1610nm
Maximum Input Power
Standard-1dBm
High Sensitivity (-H)-8dBm
Optical Sensitivity
Standard-23dBm @ 1.485Gb/s
High Sensitivity (-H)-28dBm @ 1.485Gb/s
Serial Video Output
Number of Outputs3 (1 output DVB-ASI/M2S compliant)
ConnectorBNC per IEC 61169-8 Annex A
Impedance75Ω nominal
Signal Level800mV nominal
DC Offset0V ±0.5V
Rise/Fall Time< 270ps nominal
Overshoot< 10% of amplitude
Return Loss> 12dB up to 1.5GHz
Wideband Jitter< 0.2UI (reclocked)
Electrical
Voltage+12V DC
Power8 Watts
EMI/RFIComplies with FCC Part 15 Class A, EU EMC Directive
Physical
Number of Slots1

Ordering Information

7707OE-HDHD Optical to Electrical Converter, 19.4Mb/s to 1.5Gb/s
7707OE-HD-HHigh Sensitivity HD Optical to Electrical Converter, 19.4Mb/s to 1.5Gb/s
Ordering Options
Notes• Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SCSC/PC
+STST/PC
+FCFC/PC
Rear Plate Suffix
+3RU3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
Enclosures
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU Multiframe which holds 15 modules
7800FR3RU Multiframe which holds 15 modules
7701FR1RU Multiframe which holds 3 modules
S7701FR7700 Series Standalone Enclosure
Patch Cable
CB-FP1M-SCPCSingle mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPCSingle mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPCSingle mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPCSingle mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPCSingle mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPCSingle mode fiber cable, 10m, ST/PC male termination
About Us | Contact | Support © 2012 Evertz Microsystems, Ltd. All rights reserved webmaster@evertz.com