Evertz Microsystems Ltd.

Download PDF

7707SVR-2

Dual S-Video Fiber Receiver

VistaLINK® enabled

The 7707SVR-2 is a VistaLINK® capable, S-Video fiber receiver for broadcast quality video signals. This single card module accepts a fiber optic input from the companion 7707SVT-2 S-Video Fiber Transmitter, demultiplexes the signals, performs D to A conversion and outputs NTSC or PAL S-Video signals.

The 7707SVR-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Features
  • Single card fiber receiver for up to two S-Video signals
  • Supports both NTSC and PAL video signals
  • Broadcast quality analog video performance
  • Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
    • Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
    • Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
    • Supports single-mode and multi-mode fiber optic cable
    • Accepts any wavelength in the 1270nm to 1610nm range
Block Diagram Block Diagram

Specifications

Optical Input
Number of Inputs1
ConnectorFemale SC/PC, ST/PC, FC/PC
Wavelength1270 to 1610nm
Maximum Power0dBm
Optical Sensitivity-23dBm
S-Video Output
StandardNTSC, SMPTE ST 170, PAL, ITU-R624-4
Number of Outputs2
ConnectorBNC per IEC 61169-8 Annex A
System Bandwidth5.5MHz
Level1.0V p-p (nominal), 0.286V p-p maximum
GainUnity gain nominal, adjustable 50% to 150%
Impedance75Ω
Return Loss> 20dB
SNR> 70dB
Differential Gain< 1.0%
Differential Phase< 0.7°
Passband Ripple
NTSC< ±0.1dB to 4.1MHz
< ±0.2dB to 5.5MHz
PAL< ±0.1dB to 4.8MHz
< ±0.2dB to 5.8MHz
System Performance7707SVT-2 + 7707SVR-2
Video Input to
Video Output Delay		< 10µs
Electrical
Voltage+12V DC
Power12 Watts
EMI/RFIComplies with FCC Part 15 Class A, EU EMC Directive
Physical
Number of Slots1

Ordering Information

7707SVR-2Dual S-Video Fiber Receiver, VistaLINK®
Ordering Options
Notes• Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SCSC/PC
+STST/PC
+FCFC/PC
Rear Plate Suffix
+3RU3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
Enclosures
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU Multiframe which holds 15 modules
7800FR3RU Multiframe which holds 15 modules
7701FR1RU Multiframe which holds 3 modules
S7701FR7700 Series Standalone Enclosure
Patch Cable
CB-FP1M-SCPCSingle mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPCSingle mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPCSingle mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPCSingle mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPCSingle mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPCSingle mode fiber cable, 10m, ST/PC male termination