Evertz Microsystems Ltd.

Download PDF

7707VB-8-HS-OC192

Eight Channel 3G/HD/SDI/DVB-ASI + Ethernet SONET / SDH Fiber Transceiver

VistaLINK® enabled
Features
  • Interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure
  • Flexibility to combine video and Ethernet signals to fill SONET/SDH capacity in each direction:
    • Six HD-SDI signals, plus one SDI/DVB-ASI or 10/100/1000 (FBM) Ethernet
    • Five HD-SDI signals, plus two SDI/DVB-ASI and 10/100/1000 (FBM) Ethernet
    • Four HD-SDI signals, plus three SDI/DVB-ASI and 10/100/1000 (full bandwidth) Ethernet
  • Other combinations up to Eight SDI/DVB-ASI, plus 10/100/1000 (full bandwidth) Ethernet
  • Full-rate, uncompressed, asynchronous video channels with wide tolerance (±50ppm)
  • Flexible Bandwidth Management (FBM) to control Ethernet bandwidth allocation
  • One loopback (output channel eight), user selectable for monitoring of inputs/outputs
    • Pluggable XFP fiber module permits wavelength swapping/sparing
    • SONET/SDH jitter performance with Stratum 3 clocking
    • Comprehensive signal and card status monitoring via four-digit card-edge display
    • VistaLINK® enabled for remote monitoring/control, with two possible interface methods:
      • Using local Ethernet connection on rear-plate (has local SNMP Agent)
      • Using 7700FC VistaLINK® Frame Controller installed in 7700FR-C frame
    • Automatic coaxial equalization up to 70m at 2.97Gb/s, 100m at 1.485Gb/s, and 250m at 270Mb/s (Belden 1694A or equivalent cable)
    • Fully hot-swappable from front (main board) and rear (XFP fiber module) of frame
    • Optical output wavelengths of 1310nm and 1550nm
    • Female LC Duplex fiber connector
Power & Distance
TransmitterReceiver
MinMaxDistances
1310nm-6dBm-1dBm10km
1550nm-1dBm+2dBm40km
Block Diagram Block Diagram

Specifications

Serial Video Input
StandardsSMPTE ST 259-C, SMPTE ST 292-1, DVB-ASI, SMPTE ST 305 (SDTi)
Number of Inputs8
Connector1 BNC per IEC 61169-8 Annex A
EqualizationAutomatic to 70m @ 2.97Gb/s, 100m @ 1.485Gb/s, and 250m @270Mb/s with Belden 1694A or equivalent
Return Loss> 15dB up to 1.5GHz
> 10dB to 3GHz
Freq Offset Tolerance±50ppm
Serial Video Output
StandardsSMPTE ST 259-C, SMPTE ST 292-1 DVB-ASI, SMPTE ST 305 (SDTi)
Number of Outputs8
Connector1 BNC per IEC 61169-8 Annex A
Signal Level800mV nominal
DC Offset0V ±0.5V
Rise And Fall Time< 135ps (HD/3G)
< 900ps (SD)
Overshoot< 10% of amplitude
Return Loss> 15dB to 1.5GHz
> 10dB to 3GHz
Alignment Jitter< 0.2UI (Reclocked) to 1.485Gb/s
< 0.3UI (Reclocked) to 2.97Gb/s
Optical Output
Number1
StandardOC-192C/STM-64
ConnectorFemale LC Duplex
Return Loss> 12dB
Fiber Size9µm core/125mm overall
Wavelengths1310nm, 1550nm
Optical Input
Number of Inputs1
StandardOC-192C/STM-64
ConnectorFemale LC Duplex
Operating Wavelength1310nm and 1550nm
Maximum Input Power-1dBm
Optical Sensitivity-11dBm
Electrical
Voltage+12V DC
Power25 Watts
Physical
Number of Slots3
Compliance
Electrical SafetyCSA Listed to CSA C22.2 No. 60065-03 IEC 60065-(2001-12) 7th Edition
Complies with CE Low voltage directive 93/68/EEC
Laser SafetyComplies with 24 CFR 1040.10 and 1040.11 except for deviations pursuant to LN No. 50, dated July 26, 2001
Complies with IEC 60825-1, Am. 2
EMI/RFIComplies with FCC regulations for class A devices
Complies with EU EMC directive 89/336/EEC

Ordering Information

8 x HD/SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver
7707VB-8-HS-OC192+13S1310nm XFP laser
7707VB-8-HS-OC192+15S1550nm XFP laser
Ordering Options
NotesRear plate and fiber option must be specified at time of order - eg: model +15+3RU
Rear Plate Suffix
+3RU3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
Enclosures
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU Multiframe which holds 15 modules
7800FR3RU Multiframe which holds 15 modules
Spare XFP Ordering Options
XFPT-13-SOptical XFP Transmitter, 10Gb/s, 1310nm, 10km standard sensitivity
XFPT-15-SOptical XFP Transmitter, 10Gb/s, 1550nm, 40km standard sensitivity