7708RGBR/DVIR

RGBHV / DVI / KVM Receiver

Product ManualManual
  • VistaLINK® enabled

The 7708RGBR and 7708DVIR are VistaLINK® SNMP capable RGBHV/DVI/KVM receivers for high resolution/high quality RGB and DVI video signals. Single card receiver module accepts an input from the companion 7708RGBT/DVIT RGHV/DVI/KVM Transmitters and outputs both analog or and digital DVI video. The 7708RGBR is also available with analog audio, keyboard + mouse, serial and USB 2.0 options. SFP modules available in both optical or COAX options. (See ordering options)

The 7708RGBR/DVIR occupies one card slot (two card slots for the A2KM and A2KM-USB versions) and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity. See the physical specifications for the slot count.

The 7708DVIR provides the same features listed above as the 7708RGBR, however it only supports a digital (DVI) output.

Features
  • Supports DVI or RGBHV transport over a single fiber/coax
  • Provides both RGBHV and DVI outputs simultaneously
  • 3G router compatible for KVMX applications
  • VESA video resolutions supported up to WUXGA
  • Full 24 bits per pixel color resolution
  • Ideal for use with high resolution LCD, plasma, and projection screens
  • Superior digital data transmission
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
  • Fully hot-swappable from front of frame with no fiber or electrical disconnect/ re-connect required
  • Supports single-mode and multi-mode fiber optic cable (contact factory for multi-mode applications)
  • Accepts any wavelength in the 1270nm to 1610nm range
  • Optional 2 channel stereo analog audio
  • Optional keyboard, mouse and serial
  • Optional USB 2.0 interface
  • Optional electrical SFP modules (+DIN)
Block DiagramBlock Diagram

Specifications

Video Output
StandardsRGBHV and DVI 1.0, VESA
Number of Outputs1
Connectors28-pin DVI with Analog
Video ResolutionUp to WUXGA (1920x1200) at 75Hz
Video Bandwidth500MHz
Color Resolution24 bits
Analog Output Level1.4V p-p (maximum)
Analog Output Impedance75Ω
Signal/Noise Ratio> 55dB
Analog Audio OutputA2, A2KM & A2KM-USB versions
Number of Outputs2
TypeBalanced analog audio
Connector12-pin removable terminal block
ImpedanceHigh Impedance (> 20kΩ)
Frequency Response±0.1dB (20Hz to 20kHz)
THD< 0.005% (20Hz to 20kHz)
Channel Phase Diff< ±1°
SNR> 85dB
Level-20dB to +3dB
Maximum Output Level+24dBu into 10kΩ loads
Serial, Keyboard/Mouse, USB Input/OutputA2KM & A2KM USB versions
StandardsUSB 2.0
Number
A2KM Versions3
USB Versions6
Connector2 PS2 for keyboard & mouse
3 USB Type A, 1dB-9F serial
Optical Input
Number of Inputs1 per SFP
ConnectorFemale LC/UPC
Operating Wavelength1270nm-1610nm
Max Input Power-1dBm
Optical Sensitivity
Standard-21dBm
Optical Output
Number of Outputs1 per SFP
ConnectorFemale LC/UPC
Wavelengths
Standard1310nm
CWDM1270nm -1610nm
Output Power
1310nm-2dBm ±1dBm
CWDM+4dBm ±1.5dBm
Electrical Output
Number of Outputs1 per SFP (when fitted with +DIN option)
ConnectorDIN Type 1.0/2.3 connector (75Ω)
Electrical InputA2KM & A2KM-USB versions
Number of Inputs1 per SFP (when fitted with +DIN option)
ConnectorDIN Type 1.0/2.3 connector (75Ω)
EqualizationTypical 100m @ 3GB/s
Electrical
Voltage+12V DC
Power13 watts (based on options)
Physical
Number of Slots
Standard and A2 versions1
A2KM and USB versions2
Compliance
Laser SafetyClass 1 laser product
Complies with 24 CFR 1040.10 and 1040.11
IEC 60825-1
EMI/RFIComplies with FCC Part 15, Class A
EU EMC directive

Ordering Information

7708RGBRRGBHV/DVI Receiver, 3G router compatible, VistaLINK®, includes SFP Receiver (must specify SFP module for COAX)
7708RGBR-A2RGBHV/DVI +2 Analog Audio Receiver, 3G router compatible, VistaLINK®, includes SFP Receiver (must specify SFP module for COAX)
7708RGBR-A2KMRGBHV/DVI +2 Analog Audio + Bi-di Keyboard and Mouse Receiver, 3G router compatible, VistaLINK® (must specify SFP module)
7708RGBR-A2KM-USBRGBHV/DVI +2 Analog Audio + Bi-di Keyboard and Mouse + USB 2.0 Receiver, 3G router compatible, VistaLINK®, (must specify SFP module)
7708DVIRDVI Receiver, 3G router compatible, VistaLINK®, includes SFP Receiver (must specify SFP module for COAX)
7708DVIR-A2DVI +2 Analog Audio Receiver, 3G router compatible, VistaLINK®, includes SFP Receiver (must specify SFP module for COAX)
7708DVIR-A2KMDVI +2 Analog Audio + Bi-di Keyboard and Mouse Receiver, 3G router compatible, VistaLINK®, (must specify SFP module)
7708DVIR-A2KM-USBDVI +2 Analog Audio + Bi-di Keyboard and Mouse + USB 2.0 Receiver, 3G router compatible, VistaLINK® (must specify SFP module)
Electrical Ordering Options
+DINSFP Transceiver, DIN Type, supports rates up to 3GB/s
Optical Ordering OptionsOnly for A2KM and A2KM-USB
Notesxx - 27 to 61 and 55=1550nm laser
+13SFP Transceiver, 1310nm, standard sensitivity receiver, supports rates up to 3GB/s
+CxxSFP Transceiver, CWDM, standard sensitivity receiver, supports rates up to 3GB/s
Ordering Options
NotesRear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Rear Plate Suffix
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
+3RU3RU rear plate for use with 350FR, 7700FR-C, 7800FR or 7801FR Multiframes
Enclosures
350FRPortable Multiframe which holds 7 single slot modules
7700FR-C3RU Multiframe which holds 15 single slot modules
7800FR3RU Multiframe which holds 15 single slot modules
7801FR1RU Multiframe which holds 4 single slot modules
7701FR1RU Multiframe which holds 3 single slot modules
S7701FR7700 Series Standalone Enclosure