7710UC-HD
HD Upconverter
The 7710UC-HD High Definition Upconverter provides high quality conversion of 270Mb/s standard definition (SMPTE 259M-C) signals to the common 1.5Gb/s high definition (SMPTE 292M) video formats. The 7710UC-HD has 10-bit processing, 2 reclocked SDI outputs and 2 HD Serial Digital outputs. The 7710UC-HD outputs 1080i/59.94, 1080i/50 and 720p/59.94 HD video formats.
The 7710UC-HD has color space conversion from ITU rec. 601 to ITU rec. 709. The 7710UC-HD provides user adjustable common 4:3 to 16:9 aspect ratio conversion choices; 4:3 with side panels, 16:9 anamorphic stretch, 16:9 letterbox zoom to full size and 14:9 letterbox zoom to full size or 14:9 letterbox zoom to full height 13:9 or 14:9 with side panels.
The Upconverter accepts 2 groups of SMPTE 272M embedded audio on the input and re-embeds them into the HD SMPTE 292M 1.5Gb/s output. The re-embedded audio is compliant to SMPTE 299M and will have appropriate delay added to compensate for video delay incurred by the upconversion process, thus avoiding the need for external de-embedding and re-embedding of audio. The audio is also available as 4 unbalanced AES outputs.
The 7710UC-HD occupies two card slots and can be housed in the 1RU 7701FR frame which holds up to three single or dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module. The 7710UC-HD provides card edge LEDs to indicate signal present, genlock present and audio groups present.
Features
- High quality SD to HD upconversion
- Supports 4:3 Side Panel, 16:9 Crop, 16:9 Stretch, 13:9 Crop, and 14:9 Crop and user defined aspect ratio conversions.
- SD to HD colour space conversion (ITU rec. 601 to ITU rec. 709)
- Reference input allows for phasing of output video
- Module supports min. delay or variable delay for video output without reference
- Module supports video output referenced to genlock with variable delay
- Analog monitor output on screen display used to configure the operating modes
|
- De-embeds audio from SD video and embeds into HD video (2 groups) with channel remapping
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Extraction of VITC on SD input and conversion to HD SMPTE 12M-2 Timecode (VITC and LTC) on output
- Transcoding and translation of EIA-608 Line 21 captions from the SD input to EIA-708 (SMPTE 344M) ANC captions on the HD output
|
Specifications
| Standard | 525 or 625 line SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio |
|---|
| Number of Inputs | 1 |
|---|
| Connector | BNC per IEC 61169-8 Annex A |
|---|
| Equalization | Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable |
|---|
| Return Loss | > 15dB up to 270MHz |
|---|
| Standard | Same as input |
|---|
| Number of Outputs | 2 reclocked |
|---|
| Connector | BNC per IEC 61169-8 Annex A |
|---|
| Signal Level | 800mV nominal |
|---|
| DC Offset | 0V ±0.5V |
|---|
| Rise/Fall Time | 740ps nominal |
|---|
| Overshoot | < 10% of amplitude |
|---|
| Return Loss | > 15dB up to 270MHz |
|---|
| Standard | 1.5Gb/s SMPTE 292M - DIP switch selectable| Input Format | Output Format | SMPTE Standard |
|---|
| 525i/59.94 | 1080i/59.94 | 274M | | 625i/50 | 1080i/50 | 274M | | 525i/59.94 | 720p/59.94 | 296M |
|
|---|
| Number of Outputs | 2 reclocked |
|---|
| Connector | BNC per IEC 61169-8 Annex A |
|---|
| Signal Level | 800mV nominal |
|---|
| DC Offset | 0V ±0.5V |
|---|
| Rise/Fall Time | 200ps nominal |
|---|
| Overshoot | < 10% of amplitude |
|---|
| Return Loss | > 10dB at 1.5GHz |
|---|
| Type | NTSC or PAL Colour Black 1V p-p
Composite bi-level sync (525i or 625i) 300mV |
|---|
| Connector | BNC Loop per IEC 61169-8 Annex A |
|---|
| Termination | 75Ω (jumper selectable) |
|---|
| Standard | SMPTE 276M, single ended AES |
|---|
| Number of Outputs | 4 |
|---|
| Connector | Female 9-pin D |
|---|
| Resolution | 24 bits |
|---|
| Sampling Rate | 48kHz |
|---|
| Impedance | 75Ω |
|---|
| Signal Level | 1V p-p nominal |
|---|
| Number of Inputs | 3 |
|---|
| Function | User Preset select |
|---|
| Type | Opto-isolated, active low with internal pull-ups to +5 or +12V (jumper settable) |
|---|
| Connector | 3-pins (plus ground) on female 9-pin D |
|---|
| Signal Level | Closure to ground |
|---|
| Voltage | +12V DC |
|---|
| Power | 26 Watts |
|---|
| EMI/RFI | Complies with FCC Part 15 Class A, EU EMC Directive |
|---|
| Number of Slots |
|---|
| 7700 Frame Mounting | 2 |
|---|
| 7701 Frame Mounting | 1 |
|---|
Ordering Information
| 7710UC-HD | HD Modular Upconverter |
|---|
| Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
|---|
| Rear Plate Suffix |
|---|
| +3RU | 3RU rear plate for use with 7800FR, 7700FR-C or 350FR Multiframes |
|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
|---|
| +SA | Standalone Enclosure Rear Plate |
|---|
| 350FR | Portable Multiframe which holds 7 modules |
|---|
| 7700FR-C | 3RU Multiframe which holds 15 modules |
|---|
| 7800FR | 3RU Multiframe which holds 15 modules |
|---|
| 7701FR | 1RU Multiframe which holds 3 modules |
|---|
| S7701FR | 7700 Series Standalone Enclosure |
|---|
| 7700FC | VistaLINK® Frame Controller |
|---|
| CP-2116E | System Control Panel, One Touchscreen LCD and 16 LCD Buttons |
|---|
| CP-2232E | System Control Panel, 2RU, Two Touchscreen LCDs and 32 LCD Buttons |
|---|
| WP-7711HDC-SN-EAES4 | 7712HDC-SN-EAES4/7710UC-HD AES/GPIO Breakout Cable |
|---|
Download PDF (147.7kB)
7800FR Multiframe Layout Tool