Search:

• Products
• HD Up, Down & Cross Converters
• 7710XC-HD

7710XC-HD & 7710XC-AES4-HD

HD Cross Converter with VANC and Embedded Audio Support

The 7710XC-HD High Definition Format Translator/Cross Converter provides high quality conversion of your high definition (SMPTE 292M) signals to other common 1.5Gb/s high definition (SMPTE 292M) video formats. The 7710XC-HD has 10-bit processing, and 2 HD Serial Digital outputs and 1 OSD output, plus external genlock.

The 7710XC-AES4-HD accepts 2 groups of SMPTE 299M embedded audio on the input or external AES audio and re-embeds them into the serial video output and provides 4 AES audio output mirroring the embedder. The re-embedded audio is compliant to SMPTE 299M with delay adjust and has the appropriate delay added to compensate for video delay incurred by the conversion process. The audio is also available as 4 unbalanced AES outputs.

The units also transports the closed caption and time code information from input to output performing all necessary HD to HD translations and time code recalculations.

All 7710XC-HD series modules occupy 2 card slots and can be housed in the 1RU 7701FR frame which holds up to three single or dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity. The units also provide card edge LEDs to indicate signal present, genlock present and audio groups present.

Features

High quality HD to HD cross conversion Support all necessary color space conversions Full video proc functions, GBR gain YCrCb gain and offset, hue adjustment and RGB color limiter Reference input allows for phasing of output video Module supports min. delay or variable delay for video output without reference Module supports video output referenced to genlock with variable delay Output on-screen display used to configure the operating modes De-embeds Audio from HD video input and embeds into HD video output (2 groups)

Supports re-timed external 4 AES inputs and outputs (7710XC-AES4-HD only) Moves RP-188 VITC and LTC from HD input to HD output, recalculated for frame rate changes Moves HD closed captions from HD input to HD output VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, 9000NCP or 9000NCP2 Network Control Panel. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame

Specifications

HD-SDI Video Inputs
Standard	1.485Gb/s SMPTE 292M - menu selectable SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M
Number of Inputs	1
Connector	BNC per IEC 61169-8 Annex A
Input Equalization	Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable
Return Loss	> 10dB up to 1.5Gb/s

HD-SDI Serial Video Outputs
Standard	1.5Gb/s SMPTE 292M
Number of Outputs	3 Per Card
Connector	BNC per IEC 61169-8 Annex A
Signal Level	800mV nominal
DC Offset	0V ±0.5V
Rise and Fall Time	200ps nominal
Overshoot	< 10% of amplitude
Return Loss	> 10dB at 1.5GHz

AES Audio Inputs-AES4 version only
Number of Inputs	4
Standard	SMPTE 276M, single ended synchronous or asynchronous AES
Connector	BNC per IEC 61169-8 Annex A
Resolution	24 bits
Sampling Rate	48kHz
Impedance	75Ω
Signal Level	1V p-p nominal

AES Audio Output-AES4 version only
Number of Outputs	4
Standard	SMPTE 276M, single-ended synchronous AES
Connectors	BNC per IEC 61169-8 Annex A
Resolution	24 bits
Sampling Rate	48kHz
Impedance	75Ω
Signal Level	1V p-p nominal

General Purpose Inputs and Outputs
Number	4 (configurable as inputs or outputs)
Type	Opto-isolated, active low with internal pull-ups to +5 or +12V (jumper settable)
Connector	6-pin removable terminal block
Signal Level	Closure to ground

Function
Inputs	User Preset select, fade or cut for keyer, fade to black
Outputs	Tally (key on air)

Genlock Input
Type	HD Tri-Level sync, NTSC or PAL Color Black 1V p-p
Connector	BNC per IEC 61169-8 Annex A
Termination	75Ω (jumper selectable)

Electrical
Voltage	+12V DC
Power	26 Watts
EMI/RFI	Complies with FCC Part 15, Class A EU EMC Directive

Physical
Number of slots
7700 frame mounting	2
7701 frame mounting	1

Ordering Information

7710XC-HD	HD Cross Converter with VANC and Embedded Audio support
7710XC-AES4-HD	HD Cross Converter with VANC, Embedded Audio and discrete AES support

Ordering Options
Notes	• Rear plate must be specified at time of order - eg: [model]+3RU

Rear Plate Suffix
+3RU	3RU rear plate for use with 7800FR, 7700FR-C or 350FR Multiframes
+1RU	1RU rear plate for use with 7701FR Multiframe

Enclosures
350FR	Portable Multiframe which holds 7 modules
7700FR-C	3RU Multiframe which holds 15 modules
7800FR	3RU Multiframe which holds 15 modules
7701FR	1RU Multiframe which holds 3 modules