Tools
Conversion
- Video / Audio Analog to Digital
- 1RU Utility Conversion
- Video Up / Down / Cross Conversion
7711UC-HD & 7711UC-AES4-HD
HD Format Up Converter
The 7711UC-HD series of High Definition Format Up Converters deliver high quality up-conversion of SDTV to HDTV signals. The 7711UC-HD incorporates a 10 bit signal path and integrates Evertz® proprietary detail enhancement and 3D pixel adaptive noise reduction technologies. RGB gain/YCbCr gain and offset controls and RGB color limiting/legalization functions are also available.
The 7711UC-HD and the 7711UC-AES4-HD support multi-format HD/SD serial digital inputs and generate two HD serial digital outputs (1 with OSD overlays for card configuration). Inputs are auto-sensing and will "glitchlessly" switch between up-converting SD signals and passing through HD signals. An additional bi-directional BNC can be configured to supply an extra program input or an extra copy of the program output. With +F option, this extra BNC is used as a dedicated input BNC for HD FILL signals. When up-converting SD to HD, signals supplied to the HD FILL input can be keyed into the un-used portions of the output image raster (ie. side panels typically generated when converting 4:3 to 16:9) using the internal HD keyer. The internal keyer is not enabled when operating with SD IN and SD OUT.
FILL input signal must be the same format as the target output video format and must be advanced relative to output video timing (< than 1 line). These modules can accept 2 groups of SMPTE 272M embedded audio on the input and re-embed them into the serial video output (audio delay tracks video delay). The 7711UC-HD and the 7711UC-AES4-HD transport closed caption and time code information from input to output with all necessary SD to HD translation and time code recalculations taking place.
The 7711UC-HD and 7711UC-AES4-HD support the reading of AFD values from the incoming video signals and stamping of AFD values on the outgoing video. Fully adaptive AFD processing using VLPRO. The 7711UC-AES4-HD has the additional ability to stamp Dolby™ metadata on the outgoing video.
Features
|
|
Specifications
| Serial Digital Video Inputs | |
|---|---|
| Standards | 270Mb/s SMPTE 259M, menu selectable orauto detect SMPTE 260M, SMPTE 274M |
| Number of Inputs | 1 or 2 (optional based on PGM IN/OUT configuration) |
| Connector | BNC per IEC 61169-8 Annex A |
| Input Equalization | Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable |
| Return Loss | |
| SD Standards | > 15dB up to 270Mhz |
| Serial Digital Video Outputs | |
|---|---|
| Standard | 270Mb/s SMPTE 259M or 1.485Gb/s SMPTE 292M |
| Number of Outputs | 3 Per Card (or 2 based on PGM IN/OUT configuration) |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise and Fall Time | |
| SD Standards | 740ps nominal |
| HD Standards | 200ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | |
| HD Standards | > 10dB at 1.5GHz |
| Genlock Input | |
|---|---|
| Type | HD Tri-Level sync, NTSC or PAL Colour Black 1V p-p |
| Connector | BNC per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| 6Hz Input(7711UC-AES4-HD only) | |
|---|---|
| Standard | 6Hz TTL Pulse |
| Number of Inputs | 1 |
| Connector | BNC per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| LTC Input(7711UC-AES4-HD only) | |
|---|---|
| Standard | SMPTE 12M-1 |
| Number of Inputs | 1 |
| Connector | BNC per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| LTC Output(7711UC-AES4-HD only) | |
|---|---|
| Standard | SMPTE 12M-1 |
| Number of Inputs | 1 |
| Connector | BNC per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| AES Audio Inputs(7711UC-AES4-HD only) | |
|---|---|
| Number of Inputs | 4 |
| Standard | SMPTE 276M, single ended synchronous or asynchronous AES |
| Connectors | DB15 |
| Resolution | 24 bits |
| Sampling Rate | 48kHz |
| Impedance | 75Ω |
| Signal Level | 1V p-p nominal |
| AES Audio Outputs(7711UC-AES4-HD only) | |
|---|---|
| Number of Outputs | 4 |
| Standard | SMPTE 276M, single ended synchronous AES |
| Connectors | DB15 |
| Resolution | 24 bits |
| Sampling Rate | 48kHz |
| Impedance | 75Ω |
| Signal Level | 1V p-p nominal |
| General Purpose Inputs and Outputs | |
|---|---|
| Number | 4 (configurable as inputs or outputs) |
| Type | Opto-isolated, active low with internal pull-ups to +5 or +12V (jumper settable) |
| Connector | 6-pin removable terminal block |
| Signal Level | closure to ground |
| Function | User Preset select |
| Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 25 Watts |
| EMI/RFI | Complies with FCC regulations for class A devices Complies with EU EMC directive |
| Physical | |
|---|---|
| Number of slots | |
| 7700 frame mounting | 2 |
| 7701 frame mounting | 1 |
Ordering Information
| 7711UC-HD | HD Up Converter (with Noise Reduction and Image Enhancement) |
|---|---|
| 7711UC-AES4-HD | HD Up Converter (with Noise Reduction and Image Enhancement) and external AES |
| Ordering Options | |
|---|---|
| Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
| +F | Fill Input Option |
|---|
| Rear Plate Suffix | |
|---|---|
| +3RU | 3RU rear plate for use with 7800FR, 7700FR-C or 350FR Multiframes |
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
| Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 modules |
| 7700FR-C | 3RU Multiframe which holds 15 modules |
| 7800FR | 3RU Multiframe which holds 15 modules |
| 7701FR | 1RU Multiframe which holds 3 modules |