The 7720AM-AES4 Audio Mixer accepts 4 AES/EBU digital audio inputs (eight channels) and synchronously mixes all channels and routes them to any of the four AES outputs. The 7720AM-AES4 performs channel swapping, over mixes, mix downs and on-air breakaways. All processing is at 24-bit resolution. The 7720AM-AES4 provides eight channels of independent audio delay control making it ideal for retiming AES audio.
A non-PCM data mode is provided in order to pass Dolby-E or AC3 data. In this mode, channel swapping and delay is supported (mixing is not) with the requirement that the inputs are 48kHz synchronous and locked (a reference is required to be used in this mode)
Features
|
|
Block Diagram
Specifications
| AES Audio Input/Output | |
|---|---|
| Standard | SMPTE ST 276, synchronous or asynchronous AES |
| Number of Inputs | 4 |
| Number of Outputs | 4 |
| Connector | BNC loop per IEC 61169-8 Annex A or terminal block |
| Resolution | 24 bits |
| Sampling Rate | 48kHz |
| Impedance | 75Ω unbalanced, 110Ω balanced |
| Level | 1V p-p nominal |
| Genlock Input | |
|---|---|
| Type | HD Tri-level syncs, NTSC or PAL Colour Black 1V p-p, or Composite bi-level sync (525i/59.94 or 625i/50) 300 mV |
| Connector | BNC loop per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| DARS Reference | |
|---|---|
| Type | Digital Audio Signal with 48kHz sample rate |
| Standard | SMPTE ST 276-1995 single ended AES, AES-11 |
| Connector | BNC loop per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| Input to Output Processing | |
|---|---|
| Gain | ±12dB in 0.25dB steps |
| Delay | Min 7 samples with sample rate converters disabled Min 92 samples with sample rate converters enabled Adjustable to approximately 2.54 seconds |
| General Purpose In/Out | |
|---|---|
| GP Inputs | Load user preset configurations |
| Type | Opto-isolated, active low with internal pull-ups to +5V |
| Connector | Removable terminal block |
| Signal Level | +5V nominal |
| Data Logging Serial Port | |
|---|---|
| Standard | RS-422 |
| Connector | 5 pins of 12 pin removable terminal block |
| Function | Not used at this time |
| Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 8 Watts |
| EMI/RFI | Complies with FCC Part 15 Class A, EU EMC Directive |
| Physical | |
|---|---|
| Number of Slots | |
| 7700 Frame Mounting | 2 |
| 7701 Frame Mounting | 1 |
Ordering Information
| Notes | • Requires 7700FC for full module control |
|---|
| 7720AM-AES4 | Quad AES Audio Mixer, Delay, Audio Swapper |
|---|
| Ordering Options | |
|---|---|
| Notes | • This module not available in a standalone enclosure |
| • Rear plate must be specified at time of order - eg: [model]+3RU | |
| Rear Plate Suffix | |
|---|---|
| +3RU | 3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes |
| Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 modules |
| 7700FR-C | 3RU Multiframe which holds 15 modules |
| 7800FR | 3RU Multiframe which holds 15 modules |
| Accessories | |
|---|---|
| 7700FC | VistaLINK® Frame Controller |
| CP-2116E | System Control Panel, One Touchscreen LCD and 16 LCD Buttons |
| CP-2232E | System Control Panel, 2RU, Two Touchscreen LCDs and 32 LCD Buttons |



