The 7780ASIB2-DS3/E3 can transport up to 2 DVB-ASI signals, bi-directionally on a DS3/E3 circuit. Additional capability allows for a bidirectional 10/100 Ethernet connection which can be used for control and monitoring remote equipment.

The most common and affordable telco line is a DS3/E3 which offers enough bandwidth to carry 1 SD or HD compressed signal for contribution or multiple SD or HD compressed signals for distribution.

The 7780ASIB2-DS3/E3 offers a flexible way to receive up to 4 ASI on a single DS3. It also offers the capability for a bidirectional 10/100 Ethernet connection that can be used for control and monitoring remote equipment.

The 7780ASIB2-DS3/E3 is paired with the 7780ASIB2-DS3/E3 ASI transmitter over DS3/E3. Evertz offers a MPEG over IP option for output of the transport stream.

Features

Block Diagram

Specifications

• Up to 4 ASI outputs per DVB TR 101 891-270Mb/s
• • Min ASI TS output bitrate 100Kb/s, @Max total ASI TS output bitrate 40 Mb/s
  • Support 188 and 204 bytes packets
• DS3/E3 input following G703 DS3@44.736Mb/s and E3@34.368Mb/s. BNC connector
• DS3/E3 output following G703 DS3@44.736Mb/s and E3@34.368Mb/s
• 10/100 Ethernet connection with 40Mb/s data max full duplex or half duplex
• 10/100 Ethernet control port for SNMP monitoring and control

• PID processing including PID remapping and PID nullifying (max 128Pids)

• Encapsulation of MPEG-2 packets following: MAC 802.3 > IPV4 > RTP > UDP > MPEG
• Supports 1 to 7 MPEG packets per IP frame
• Provide FEC decoding (PRO MPEG forum code of practice #3-release 2 <cop3>) with L&D following the following range:
• • L * D ≤ 100
  • 1 = L ≤ 20
  • 4 = D ≤ 20
• Join Multicast by providing correct messaging using IGMP V3
• Selection of the UDP ports

Ordering Information