Evertz - 7780M4-ASI - Quad ASI TDM-Mux

Tools

7800FR Multiframe Layout Tool

DTV / Compression

MPEG-2 Encoders
- 3480ENC Series
- 7881ENC-H264HD
H.264 Encoders
- 7881ENC-H264HD
- 9782ENC-H264HD
H.264 Decoders
- 7880DEC-H264HD
JPEG2000 Decoders
- 7880DEC-J2K-2IPASI
Demodulators
- 7880IRD-H264-HD-LB
IP & ASI Encap / Decap
- 3080IPG-ASI-IPGE
IP & ASI Test Signal
- 7780TG-ASI
IP & ASI IntelliGain®
- 7820IG10-IP
IP & ASI Clean Switch
- 7880R2x1-ASI-CS-2
Transport Stream Monitoring

7780M4-ASI

Quad ASI TDM-Mux

VistaLINK® enabled

Features

Single card TDM multiplexer for four DVB-ASI transport streams
Inputs may be MPTS or SPTS with a combined bandwidth of up to 210Mb/s
Signal transport uninterrupted by loss of any/all DVB-ASI input feeds
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®

- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Fully hot-swappable from front of frame
- Output is a single 270Mb/s signal compatible with SMPTE ST 259-C transport
- Monitor port output is user-selectable from the four inputs

Specifications

ASI Input
Standard	DVB-ASI: DVB TR 101 891-270
Number of inputs	4 independent DVB-ASI 270Mb/s signals
Connector	4 BNC per IEC 61169-8 Annex A
Max Input Bitrate	210Mb/s
Equalization	Automatic to 250m @ 270Mb/s with Belden 8281 or equivalent cable
Return Loss	> 15dB up to 270Mb/s

Output
Standards
Output	SMPTE ST 259-C framing compatible
Monitor	DVB-ASI output
Total Active Bitrate	210Mb/s
Number	1 + 1 monitor
Connector	BNC per IEC 61169-8 Annex A
Signal Level	800mV nominal
DC Offset	0V ±0.5V
Rise and Fall Time	900ps nominal
Overshoot	< 10% of amplitude
Return Loss	> 15dB up to 270Mb/s
Wide Band Jitter	< 0.2UI

Electrical
Voltage	+12V DC
Power	10 Watts

Physical
Number of slots	1

Compliance
EMI/RFI	Complies with FCC Part 15, Class A EU EMC Directive

Ordering Information

7780M4-ASI	Quad ASI TDM-Mux, VistaLINK® (Companion unit to 7780D4-ASI)

Ordering Options
Notes	• Rear plate must be specified at time of order - eg: [model]+3RU

Rear Plate Suffix
+3RU	3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
+1RU	1RU rear plate for use with 7701FR Multiframe
+SA	Standalone Enclosure Rear Plate

Enclosures
350FR	Portable Multiframe which holds 7 modules
7700FR-C	3RU Multiframe which holds 15 modules
7800FR	3RU Multiframe which holds 15 modules
7701FR	1RU Multiframe which holds 3 modules
S7701FR	7700 Series Standalone Enclosure