The 7780SDIB2-IP2 is a complete hardware based solution to carry 2 ASI or SDI Bi-directionally Over-IP. As more providers are trying to deliver contribution and distribution quality video over IP networks, the 7780SDIB2-IP2 is capable of bridging traditional compressed world (ASI) or uncompressed (SDI) with the standard IP networks.

Controlled by the industry leading VistaLINK® PRO, the 7780SDIB2-IP2 offers signal providers the capability to encapsulate two MPEG-2 transport stream payloads or two SDI to a unicast or multicast standardized IP stream. The 7780SDIB2-IP2 is also capable of receiving 2 IP streams and re-create ASI streams. For contribution application, the 7780SDIB2-IP2 offers industry standard FEC support to allow data recovery on the de-encapsulation side.

The 7780SDIB2-IP2 occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity.

Features

Block Diagram

Specifications

• 2xASI input per DVB TR 101 891 270Mb/s
• 2xASI output per DVB TR 101 891 270Mb/s
• Min ASI TS input bitrate 100kb/s
• Max ASI TS input bitrate 200Mb/s
• 2xRJ45 10/100/1000 GigaE output for MPEG over IP
• 1xRJ45 10/100 control port

• IP encapsulation for each ASI input: MAC 802.3>IPV4>RTP>UDP>MPEG (RTP can be turned on and off)
• Select 1 to 7 MPEG packets per IP frame
• Optional FEC encoding (Pro MPEG forum code of practice #3- release 2<cop3>) with L&D following the following range:
• • L*D ≤ 100
  • 1 ≤ L ≤ 20
  • 4 ≤ D ≤ 20
• IP address (IP, Subnet mask, Gateway) for the source
• IP address for the destination (Unicast and Multicast)
• Selection of the source port and destination port
• Set Local MAC address of the equipment

• Join Multicast by providing correct messaging using V2/V3 (SSM Support)
• Selection of the UDP Ports

• Total Bitrate
• Null Packet Bitrate
• TS_sync_loss
• Continuity count error
• PID List

Ordering Information