7800FR, 7701FR, S7701FR, S7702FR
7800 & 7700 Series Multiframes
The 7800FR is a 3 rack unit high frame for the 7800 and 7700 series modular system. This advanced rack frame design can house up to 15 modules of any combination of the 7800 and 7700 series distribution, conversion, processing and synchronization modules. Special care was taken during the design process to ensure that the 7800FR meets the demanding needs of television studios today and has the sufficient flexibility to satisfy the emerging demands of the future.
The 7800FR is designed with a high density capacity to conserve on precious equipment rack space. Care has been taken to ensure sufficient thermal relief for up to 360 Watts of processing power per frame, to meet the increasing power demands of future high speed processing cards.
Hot swappable redundant switching power supplies and cooling fans allow power supply or fan replacement without compromising the integrity of critical signal paths. The 7800FR is available with auto ranging 100V - 240V AC power supplies.
The front loading design permits extraction of the power supplies and active modules from the front without compromising performance even at 3.0Gb/s. Thus, there is no need for time consuming re-cabling nor is there need to have access to the rear of the frame to replace or exchange modules.
The Frame is available in several different versions as stated below.
| 7800FR | 360W AC powered frame – rear cooling. |
|---|---|
| 7800FR-QT | 360W AC powered frame – rear cooling with fans on front door to increase air flow and reduce fan noise |
| 7800FR-48VDC | 360W 48V DC powered frame - rear cooling |
| 7800FR-ACDC | 360W AC and 48V DC powered frame - rear cooling |
Features
|
|
Specifications
| Electrical | |
|---|---|
| Power Supply Configuration | |
| 7800FR | Standard single, optional dual, redundant, separate AC inlets |
| 7800FR-48VDC | Standard single, optional dual, redundant, separate DC inlets on terminal strips |
| 7701FR | Standard single, optional external redundant |
| S7701FR | External power supply adapter |
| S7702FR | External power supply adapter |
| Voltage | |
| 7800FR | Auto ranging, 100V to 240V AC, 50/60Hz |
| 7800FR-48VDC | Auto ranging 36V to 60V DC |
| 7701FR | Auto ranging, 100V to 240V AC, 50/60Hz |
| S7701FR | 12V DC Nominal, Auto ranging, 100V to 240V AC power adapter included |
| S7702FR | 12V DC Nominal, Auto ranging, 100V to 240V AC power adapter included |
| Maximum Operating Current | |
| 7800FR | 4.6A (@ 100V / 60Hz), 1.85A (@ 240V / 50Hz) |
| 7800FR-48VDC | 11A (@ 48V DC) |
| 7701FR | 1.5A (@ 120V AC), 0.8A (@240V AC) |
| Maximum Power Consumption | |
| 7800FR Series | 450 Watts |
| 7701FR | 100 Watts |
| S7701FR | 36 Watts |
| S7702FR | 50 Watts |
| Maximum Module Load | |
| 7800FR Series | 360 Watts (24 Watts per slot) |
| 7701FR | 80 Watts (26 Watts per slot) |
| S7701FR | 26 Watts |
| S7702FR | 40 Watts |
| Fuses | |
| 7800FR | 6.3A, 250V ceramic time delay, 5 x 20 mm – 2 per power supply |
| 7800FR-48VDC | 12A, 250V time delay, 5 x 20 mm – 1 per power supply |
| 7701FR | 2A, 250V time delay, 5 x 20mm - line and neutral |
| S7701FR | Internal self resetting fuse |
| S7702FR | Internal self resetting fuse |
| Certification | |
|---|---|
| Safety | CSA Listed Complies with CE Low voltage Directive, 2006/95/EC |
| EMC | Complies with FCC part 15, class A Complies with EU EMC directive, 2004/108/EC |
| Status Indicators7800FR, 7800FR-48VDC & 7701FR only | |
|---|---|
| PSU status LED Local Error/Failure LED | |
| Tally Output Connector | 4 pin terminal, relay N/O, N/C for status/fault alarm, 1A, 30V DC maximum |
| Physical | |
|---|---|
| Dimensions | |
| 7800FR | 19”W x 5.25”H x 14.5”D (483mm W x 133mm H x 368mm D) |
| 7800FR-48VDC | 19”W x 5.25”H x 14.5”D (483mm W x 133mm H x 368mm D) |
| 7800FR-QT | 19”W x 5.25”H x 15.75”D (483mm W x 133mm H x 400mm D) |
| 7701FR | 19”W x 1.75”H x 14.5”D (483mm W x 45mm H x 368mm D) |
| S7701FR | 5"W x 1.75"H x 14.5"D (127mm W x 45mm H x 368mm D) |
| S7702FR | 5.6"W x 2.6"H x 14.5"D (142mm W x 66mm H x 368mm D) |
| Temperature | 0 - 40°C |
| Module Capacity | |
| 7800FR Series | 15 single slot modules |
| 7701FR | 3 single or dual slot modules |
| S7701FR | 1 single or dual slot module |
| S7702FR | 1 single, dual or triple slot module |
| Weight | |
| 7800FR Series | 32lbs (14.5kg) Full 17.4lbs (8kg) Empty |
| 7701FR | 10lbs (4.5kg) Full 7lbs (3.1kg) Empty |
| S7701FR | 1.3lbs (.58kg) |
| S7702FR | 1.5lbs (.68kg) |
Ordering Information
| Notes | • Some 7700 and 7800 series modules cannot be accommodated in the 7701FR or standalone enclosures. See individual product brochure or contact factory |
|---|
| 7800FR | 3RU Multiframe which holds up to 15 single slot modules with AC power supply |
|---|---|
| 7800FR-ACDC | 360W AC and 48V DC powered frame - rear cooling |
| 7800FR-QT | 3RU Quiet Multiframe which holds up to 15 single slot modules with AC power supply |
| 7800FR-48VDC | 3RU Multiframe which holds up to 15 single slot modules with 48V DC power supply |
| 7701FR | 1RU Multiframe which holds up to 3 single or dual slot modules |
| S7701FR | Standalone frame which holds 1 single slot or 1 dual slot module with power supply |
| S7702FR | Standalone frame which holds 1 single, dual or triple slot with power supply |
| Ordering Options | |
|---|---|
| +78P | Redundant power supply for 7800FR |
| +PSX | Optional external redundant power supply for 7701FR when ordered with frame |
| +78PQT | Redundant power supply for 7800FR-QT frame |
| +78PDC | Redundant power supply for 7800FR-48VDC frame |
| Accessories | |
|---|---|
| 7800PS | Additional power supply for 7800FR |
| 7800RS-15 | Rear support kit 15” for 7800 Frame |
| 7800PS-QT | Additional Power Supply for 7800FR-QT |
| 7800PS-48VDC | Additional Power Supply for 7800FR-48VDC |
| 7800FR-QT-KIT1 | Kit to convert 7800FR with single PS to 7800FR-QT |
| 7800FR-QT-KIT2 | Kit to convert 7800FR with dual PS to 7800FR-QT |
| 7701PSX | Optional external power supply for 7701FR for existing hardware |
| 7701PS | Internal power supply for 7701FR (replacement or spare orders only) |
| S7701P | Rear connector plate for S7701FR standalone frame (price applies when ordered separately; discounted when ordered with module) |
| S7701FR-RP | Rackmount panel mounts 3xS7701FR enclosures in 1RU rack space |