Evertz Microsystems Ltd.

Download PDF

7880ENC-J2K-IPASI

SD & HD JPEG2000 Encoder Over ASI & IP

VistaLINK® enabled

The 7880ENC-J2K-IPASI is a JPEG2000 SD & HD encoder card. The 7880ENC-J2K-IPASI is Evertz 3rd generation versatile JPEG2000 codec. It offers variable JPEG2000 compression rate on ASI or IP. The 7880ENC-J2K-IPASI offers better quality, higher rate and lower latency than previous generations. The 7880ENC-J2K-IPASI also supports pass through of up to 4 AES groups (16 channels) of embedded audio. The card functions are controlled through the VistaLINK® interface.

The 7880ENC-J2K-IPASI is the perfect product to encode back haul or archive high quality contribution video with low end-to-end delay. The JPEG2000 offers superior quality than MPEG-2 codec without the MPEG-2 blocking artifacts at lower latency.

Features
  • 1 x SD/HD JPEG2000 Encoder
  • Supports 1080i/59.94, 1080i/50, 1080i/60, 1080p/30, 1080p/30sF, 1080p/29.97, 1080p/29.97sF, 1080p/125, 1080p/25sF, 1080p/24, 1080p/24sF, 1080p/23.98, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 1035i/60, 1035i/59.94, 525i/59.94 and 625i/50
  • Select from multiple inputs
  • Selection of output format (ASI or IP)
  • Handles up to 4 groups of audio (Pass through, no compression)
  • All VANC & HANC passthrough
    • Variable video Bitrate from 10 to 100Mb/s for SD and 20 to 250Mb/s for HD
    • Offers control over encoding parameters for optimizing encoding/quality
    • Framing of JPEG2000 into valid MPEG-2TS
    • IP Encapsulation with FEC
    • VistaLINK® control
    • 2 slot card (7 cards per 3RU)
    • Compatible with the companion decoder 7880DEC-J2K-IPASI
    • Optional 3G support
Block Diagram Block Diagram

Specifications

Serial Video Inputs
Standard
HDSMPTE ST 292-1, (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) embedded audio
SDSMPTE ST 259 (525i/59.94 and 625i/50)
Number of Inputs4 SD/HD with loop out
JPEG2000 Over ASI Outputs
StandardASI DVB TR 101 891-270Mb/s
Number of Inputs2 SD/HD with loop out
Number of Outputs4
Min ASI TS input bitrate 10Mb/s
Max total ASI TS input bitrate 210Mb/s
JPEG2000 Over IP Outputs
Encapsulation parameters
  • IP encapsulation: MAC 802.3 > IPV4 > RTP > UDP > MPEG (RTP can be turned on and off) - Select 1 to 7 MPEG packets per IP frame
  • FEC encoding (Pro MPEG forum code of practice #3-release 2 <cop3>) with L&D following the following range:
    • L*D ≤ 100
    • 1 ≤ L ≤ 20
    • 4 ≤ D ≤ 20
  • IP address (IP, Subnet mask, Gateway) for the source
  • IP address for the destination (Unicast and Multicast)
  • Selection of the source port and destination port
  • Set Local MAC address of the equipment
Encoding parameters
EncodingCapped VBR mode
Bitrate Setting10 to 100Mb/s for SD
20 to 250Mb/s for HD
LatencyMax encoder/decoder delay 60ms
ControlVistaLINK® offers setup and remote monitoring of the card
Electrical
Voltage+12V DC
Power40 watts
EMI/RFIComplies with FCC Part 15, Class A
EU EMC Directive
Physical
Number of Slots2

Ordering Information

7880ENC-J2K-IPASISD & HD JPEG2000 Encoder Over ASI & IP
Ordering Options
NotesRear plate must be specified at time of order - eg: [model]+3RU
+3G1080p59.94, 50HZ 3G input, level B
Rear Plate Suffix
+3RU3RU rear plate for use with 7800FR, 7801FR, 7700FR-C or 350FR Multiframes
Enclosures
350FRPortable Multiframe which holds 7 modules
7800FR3RU Multiframe which holds 15 modules
About Us | Contact | Support © 2012 Evertz Microsystems, Ltd. All rights reserved webmaster@evertz.com