EQX Info
Download PDF
EQX – 576x576 & 288x288
High Density SD / HD / 3G Router
Designed for Performance Ultra Wide Band Routing
By offering a format independent data path, the EQX supports signals from 3Mb/s all the way up to 3Gb/s including SD-SDI, HD-SDI, DVB-ASI, SMPTE 310M digital video formats as well as optical formats and other high data rate signals. In addition to this the EQX supports four independent timing planes which provides independent SMPTE compliant switching for up to four different digital video signal formats.
Intelligent Auto-Configuration
The EQX's exceptional Source-By-Source intelligent auto configuration facility allows the path to each destination to be independently and instantly re-configured to suit the requirements of the source being switched. This includes auto selecting the Reclocking/Non-reclocking circuitry, the ASI mode as well as selecting the correct switch point.
System Flexibility
The inspired modular approach of the EQX's design provides excellent in-service expansion capabilities. In convenient steps of 18, the number of inputs and/or outputs can be increased from the base size of 18x18 all the way up to 576x576, and beyond, in square and non-square configurations.
Internal Splitting and Combining
Utilizing internal passive splitting technology the EQX can offer passive looping inputs that remain SMPTE compliant. Using the passive input splitting as well as passive output combining the EQX offers the ability to scale up to 1152x1152 without requiring complex, expensive and difficult to install and maintain external splitting and combining or active DA-ing of sources and switching of destinations
High Density
Available Double Density Outputs allow the EQX to grow past 576 outputs in the 26RU chassis and past 288 outputs in the 16RU chassis.
Multiview Processor Integration
The EQX now integrates X-Link on both 16 and 26RU models. X-Link is a high density interconnect to a wide variety of Evertz Multiveiw Processors that DOES NOT use up standard router outputs. A 576x576 EQX will still have the full 576 outputs while supporting more than 200 additional outputs to an Evertz Multiview Processor. XLink technology is a unique Evertz signal interconnect carrying a large block of signals over a single connector.
Audio Routing
The EQX supports the ability to DE-embed AES from any input signal deliver it as discrete AES, Analog Audio, MADI, or to be recombined with other AES channels, Analog inputs, Discrete AES inputs and RE-embedded on any output video. Any type of input: Embedded AES, Discrete AES, Analog to any type of output: Embedded AES, Discrete AES, Analog.
Compact Design
The EQX delivers a high broadcast quality 576x576 routing capability in a compact 26RU frame, while expansion to 1152x1152 ensures a migration path for even larger applications.
Comprehensive Control
The EQX provides comprehensive connectivity to suit the most demanding installations. The internal frame controllers provide complete connectivity to any number of remote control panels and 3rd party control devices such as automation systems via multiple Q-Link, F-Link, Ethernet and Serial ports. The optional advanced EQX control system makes enterprise installations with advanced tie-lines, automated pathfinding, and advanced control surfaces easy to implement and manage.
Independent Monitoring
EQX provides extensive signal monitoring of both inputs and outputs, power supply voltages, interior temperatures and fan speeds. All monitored data is available through SNMP for facility-wide monitoring systems such as VLPRO.
Simple Maintenance
The advanced design of the EQX ensures that all active components, including input, output, crosspoint modules, frame controllers, cooling fans and power supplies, are accessible from the front of the frame and can be hot swapped at any time for maintenance.
Outstanding Redundant Protection
The EQX is the ultimate design in terms of system availability. The EQX architecture contains redundant protection for all of the critical system elements. The architecture provides redundant cross-point configurations, redundant frame controllers, external redundant load sharing power supplies, redundant easy access cooling fans and a dedicated monitoring bus that is independent of the system cross-points. In the event of a failure, manual or automatic re-routing of signals on an output-by-output Path-by-Path basis is fully supported by the system software. Using the EQX monitoring capabilities, output quality can be verified prior to switching to redundant signal paths. The EQX is fully SNMP enabled and supports seamless integration with VistaLINK® PRO command and control systems.
Features & Benefits
|
|
Specifications
| Configuration | |
|---|---|
| 576x576 in 26RU | (PSU separate 1RU) |
| 288x288 in 16RU | (PSU separate 1RU) |
| Inputs | Selectable in blocks of 18 |
| Outputs | Selectable in blocks of 18 |
| Redundant Protection | |
|---|---|
| Redundant Crosspoint Redundant Frame Controller Redundant Power Supply Redundant Cooling Fans | |
| Video Inputs | |
|---|---|
| Formats | SMPTE 259M, SMPTE 292M, SMPTE 310M, SMPTE 424M, ASI |
| Optical Formats | SMPTE 292M, GLINK, any optical signal between 3Mb/s and 3Gb/s |
| Signal Level | 800mV p-p |
| Impedance | 75Ω terminating |
| Return Loss | > 15dB typical (5-1500MHz) > 10dB typical (1.5-3GHz) |
| Cable Equalization | Belden 1694 @ 270MHz 300m Belden 1694 @ 1.5GHz 100m |
| Connectors | BNC |
| Video Outputs | |
|---|---|
| Signals Supported | Same as Input |
| Reclocking | Configurable |
| Non-Reclocking | Configurable |
| Signal Level | 800mV p-p ±10% |
| Impedance | 75Ω terminating |
| Return Loss | > 15dB typical (5-1500MHz) > 10dB typical (1.5-3GHz) |
| DC Offset | 0 ±0.5V |
| Output Jitter | 0.2 UI |
| Connectors | BNC |
| Reference Timing | |
|---|---|
| Switching Reference | Analog 525/625/tri-level HD, looping connections |
| Connector | 2 BNC |
| Signal Level | 1V p-p ±3dB |
| Impedance | 75Ω terminating active loop out optional |
| Reference Timing | 4 independent timing planes, programmable output by output |
| Control | |
|---|---|
| Q-Link | 4x 75Ω video cable (max length 500m) |
| F-Link | 2x RJ45 |
| Serial RS422/232 | 2x D9 female |
| Ethernet | 10/100baseT, 2x RJ45 |
| Physical | |
|---|---|
| Height | |
| 26RU | 45.5" (115.5cm) |
| 16RU | 28" (49cm) |
| Width | 19" (483mm) 19" Rack Mount |
| Depth | 19.4" (493mm) over hinges and BNCs |
| Operating Temperature | 0°C - 40°C |
| Cooling | Fan cooled, front to rear |
| Power | |
|---|---|
| Voltage | Auto ranging 100V to 240V 50/60Hz Up to 4 load sharing PS modules in 1RU frame - separate mains input for each module or external 48V DC |
| Power | 1200 Watts per PS module |
| 288x288 | 1500W fully loaded configuration |
| 576x576 | 3000W fully loaded configuration |
| Redundancy | Separate 1RU frame with up to 4PS modules for 1:1 redundancy available |
Ordering Information
| • For ordering information, please contact the factory or your local evertz sales agent. |
| Patch Cable | |
|---|---|
| CB-FP1M-SCPC | Single mode fiber cable, 1m, SC/PC male termination |
| CB-FP1M-STPC | Single mode fiber cable, 1m, ST/PC male termination |
| CB-FP5M-SCPC | Single mode fiber cable, 5m, SC/PC male termination |
| CB-FP5M-STPC | Single mode fiber cable, 5m, ST/PC male termination |
| CB-FP10M-SCPC | Single mode fiber cable, 10m, SC/PC male termination |
| CB-FP10M-STPC | Single mode fiber cable, 10m, ST/PC male termination |