Search:

• Products
• Routers
• Q-AA

Q16-AA & Q32-AA

Q16 & Q32 Mono & Stereo Analog Audio Router

The Q16-AA and Q32-AA are small mono and stereo analog audio routers.

Configuration: The design of the Q16-AA and Q32-AA router allows them to be configured in square or non-square sizes.

Q16-AA: The Q16-AA is housed in a 1RU frame and is only available in a non-redundant power supply configuration.

Q16-AA Mono
Available in four fixed sizes, 16x16, 32x8, 32x16 and 32x32.

Q16-AA Stereo
Available in three fixed sizes, 16x4, 16x8 and 16x16.

Q32-AA: The Q32-AA is housed in a 2RU frame and is available in a redundant power supply configuration.

Q32-AA Mono
Available in seven fixed sizes, 16x16, 32x8, 32x16, 32x32, 64x8, 64x16 and 64x32.

Q32-AA Stereo
Available in six fixed sizes, 16x4, 16x8, 16x16, 32x8, 32x16 and 32x32.

Control: Both the Q16-AA and the Q32-AA router include, as standard, an internal Frame Controller module which supports a single Q-Link and Serial port on the rear of the router. The optional internal CI module can be fitted to the Q32-AA to increase the number of Q-Link and Serial ports. This option is not available for the Q16-AA.

The Q16-AA and Q32-AA have a number of control options, they are:

Local Control Panels: The CP-1600A-LP, can be fitted to the Q16-AA. This option is not available for the Q32-AA.

Passive Remote Control Panels: The CP-1601A-P and CP-1604-P passive remote control panels can be fitted to the Q16-AA and Q32-AA router via a PI-1604 or PI-1608 parallel to interface.

Remote Control Panel: Any panel(s) from the entire range of Quartz [a:/products/routers/control-panels]remote control panels[a/] can be used with the Q16-AA and Q32-AA router connected via Q-Link.

External third party control: The Q16-AA and Q32-AA router can be remotely controlled via an external third party control device, such as an automation system, when connected to the routers serial port.

Expansion: The input or output stage of the Q16-AA and the Q32-AA can be expanded from 16 to 32 depending upon the audio format of the router, mono or stereo. In all cases the router needs to be returned to the local service centre to be upgraded. The routers can not be expanded beyond their frame size.

Power Supply: The power supplies for the Q16-AA and the Q32-AA are internal. The 2RU Q32-AA frame can be fitted with an optional redundant power supply with separate AC power inlet and alarm output. This option is not available for the Q16-AA.

Features

Output Crossover, which is available on mono routers configured as stereo provides the following extra features: left and right channels can be reversed left (or right) channel can be fed to both left and right outputs Handles timecode, even at spooling speeds Electronically balanced inputs with excellent common mode rejection

Electronically balanced outputs Frames may be stacked for use in multi-level systems XLR Breakout Panels are available to simplify installation Diagnostic monitoring of temperature and PSU status Built-in control system All modules are installed from the front for easy access for upgrades and maintenance

Specifications

Configuration
Inputs
Stereo	Q16 fixed at 16 Q32 selectable, 16 or 32
Mono	Q16 selectable, 16 or 32 Q32 selectable, 16, 32 or 64
Outputs
Stereo	Q16 selectable, 4, 8 or 16 Q32 selectable, 4, 8, 16 or 32
Mono	Q16 selectable, 8, 16 or 32 Q32 selectable, 8, 16, 32 or 64

Audio Inputs
Signal level	0dBu nominal, +24dBu max
Impedance	20kΩ
Common Mode Rejection
20Hz to 3kHz	-80dB, -100dB typical at 50/60Hz
3kHz to 20kHz	-60dB, -70dB typical at 20kHz
Common Mode Level	+27dBu maximum, no signal
Connectors	D50 female

Audio Outputs
Impedance	40Ω balanced
D.C. on Output	±50mV
Connectors	D50 female

Signal Path
Insertion Gain	±0.1dB
Frequency Response	±0.25dB (20Hz to 20kHz), -3dB to 150kHz
Delay between two routes	1µs
Total Harmonic Distortion	0.02%, 0.01% typical -10dBu to +20dBu and 20Hz to 20kHz
Crosstalk	-80dB (20Hz to 20kHz)
Noise	-85dB RMS (20Hz to 20kHz, unweighted)

Control
Q-Link to remote panels	1 as standard (additional 3 Q-links optional) 75Ω video cable 500m (1600 ft) max. length
Serial RS232/422	1 as standard (additional port optional) D9 female

Electrical
Supply	100 - 240V, 50/60Hz
Power consumption	20 Watts (Q16) or 40 Watts (Q32)
Backup	Option with alarm output on 2RU frame

Physical
Height	Q16: 1RU, 44mm (1.75" nom.) Q32: 2RU, 88mm (3.5" nom.)
Width	19" rack mount
Depth	485mm (19" nom.)
Weight	Q16: 5.2kg (11.3lb) Q32: 6.6kg (14.5lb)
Operating Temperature	0 - 40°C
Specification Maintained	10 - 30°C
Ventilation
Q16	Natural convection
Q32	Fan cooled. Intake at front. Exhaust at side

Ordering Information

Notes	• Each frame ships with a single power supply as standard. An optional redundant power supply is available on the Q32

Q16-1604-AAS	1RU 16 x 4 Stereo Analog Audio Router
Q16-1608-AAS	1RU 16 x 8 Stereo Analog Audio Router
Q16-1616-AAS	1RU 16 x 16 Stereo Analog Audio Router
Q16-3208-AAM	1RU 32 x 8 Mono Analog Audio Router
Q16-3216-AAM	1RU 32 x 16 Mono Analog Audio Router
Q16-3232-AAM	1RU 32 x 32 Mono Analog Audio Router
Q32-1604-AAS	2RU 16 x 4 Stereo Analog Audio Router
Q32-1608-AAS	2RU 16 x 8 Stereo Analog Audio Router
Q32-1616-AAS	2RU 16 x 16 Stereo Analog Audio Router
Q32-3208-AAM	2RU 32 x 8 Mono Analog Audio Router
Q32-3216-AAM	2RU 32 x 16 Mono Analog Audio Router
Q32-3232-AAM	2RU 32 x 32 Mono Analog Audio Router
Q32-3208-AAS	2RU 32 x 8 Stereo or 64 x 8 Mono Analog Audio Router
Q32-3216-AAS	2RU 32 x 16 Stereo or 64 x 16 Mono Mono Analog Audio Router
Q32-3232-AAS	2RU 32 x 32 Stereo or 64 x 32 Mono Mono Analog Audio Router

Ordering Options
+2PS	Redundant Power Supply (Only available for the Q32)

Accessories
Notes	• Options CI-0001 and CI-0004 are only available for Q32 frames

Control Panels	Enhance the function and usability of this router with a variety of control panels
CI-0001	Sub-module that enables a second RS232/422 serial port
CI-0004	Multi Q-Link Card - Fits inside frame to add up to three Q-Link ports and one RS232/422 port
AK-0002	Rear frame support kit for Q16, strongly recommended for mobile applications
AK-0006	D50 Mating Audio Connectors, all male type, one required for each group of 16 inputs or outputs
AK-0008	16 way XLR Breakout Panel, Male, 1RU. Includes 3m flying lead with D50 connector pre-wired for connection to Quartz audio routers, inputs or outputs
AK-0009	16 way XLR Breakout Panel, Female, 1RU. Includes 3m flying lead with D50 connector pre-wired for connection to Quartz Audio routers inputs or outputs