Evertz Microsystems Ltd.

A Quartz Product

Q16-RR & Q32-RR

Relay Data Routers

The Q16-RR and Q32-RR relay routing switcher has been designed to route signals which cannot be handled by normal video or audio routers, either because the signal is bi-directional, or has incompatible levels.

The 16x8 1RU unit is supplied complete with power supply and the standard Quartz controller. A 2RU frame is available if a 16x16 matrix is required and/or a redundant power supply, Note the inputs must be wired together externally.

Configuration: The Q16-RR is housed in a 1RU frame and switches 16 sources to 8 destinations. The input and output stage of the Q16-RR is fixed.

The Q32-RR is housed in a 2RU frame and can switch up to 16 sources to 16 destinations. The input and output stage of the Q32-RR is fixed.

Control: Both the Q16-RR and the Q32-RR router include, as standard, an internal Frame Controller module which supports a single Q-Link and Serial port on the rear of the router. The optional internal CI module can be fitted to the Q32-RR to increase the number of Q-Link and Serial ports. This option is not available for the Q16-RR.

Q32-RR Rear Panel diagram

The Q16-RR and Q32-RR have a number of control options, they are:

Local Control Panels: The CP-1600A-LP, can be fitted to the Q16-RR. This option is not available for the Q32-RR.

Passive Remote Control Panels: The CP-1601A-P and CP-1604-P passive remote control panels can be fitted to the Q16-RR and Q32-RR router via a PI-1604 or PI-1608 parallel to interface.

Remote Control Panel: Any panel(s) from the entire range of Quartz remote control panels can be used with the Q16-RR and Q32-RR router connected via Q-Link.

External third party control: The Q16-RR and Q32-RR router can be remotely controlled via an external third party control device, such as an automation system, when connected to the routers serial port.

Expansion: Both the Q16-RR and the Q32-RR can not be expanded.

Power Supply: The power supplies for the Q16-RR and the Q32-RR are internal. The 2RU Q32-RR frame can be fitted with an optional redundant power supply with separate AC power inlet and alarm output. This option is not available for the Q16-RR.

Features

  • Two pole model used for two wire signals, such as balanced bi-directional audio
  • Four pole model used for four wire signals, such as RS422 control
  • With external wiring, frames may be stacked for larger numbers of inputs and outputs
  • Suitable for telephone signals with ringing
  • Relay contacts default to open condition in the absence of power
  • Front access plug-in modules for easy maintenance and upgrades
  • RS232/422 Serial Interface for remote control
  • D50 multi-pole for signal connectors
  • Diagnostic monitoring of temperature and PSU status
  • Built-in control systems

Specifications

Configuration
InputsFixed at 16
OutputsSelectable, 8 or 16
Relay Contacts
TypeGold over silver palladium
Resistance1Ω maximum
Operate/Release Time10ms maximum
Contact Rating0.5A @ 24V DC, 0.15A @ 100V RMS AC, 100V AC/DC
Service LifeTypically 1.0 x 106 at low load, 0.5 x 106 at full load
Control
Q-link to Remote Panels1 as standard (additional 3 Q-links on Q32 with CI-0004 option), 75Ω video cable, 500m (1600 ft) max. length
Serial RS232/4221 as standard (additional port on Q32 with CI-0001 or CI-0004 option), D9 female
Electrical
SupplyAuto ranging 100-240V AC, 50/60Hz
Power consumption25 Watts
BackupOptional with alarm output
Physical
Height
Q161RU, 44mm (1.75" nom.)
Q322RU, 88mm (3.5" nom.)
Width19" rack mount
Depth485mm (19" nom.)
Weight
Q165.5kg (12lb) typical
Q326.7kg (15lb) typical
Operating Temperature0 - 40°C
VentilationNatural convection

Ordering Information

Notes• Each frame ships with a single power supply and control card as standard
Q16-1608-RR1RU 16 x 8 Relay Router
Q32-1608-RR2RU 16 x 8 Relay Router
Q32-1616-RR2RU 16 x 16 Relay Router
Ordering Options
Notes• +2P 2 Pole option ships standard
+2PSRedundant power supply
+2P2 Pole
+4P4 Pole
Accessories
Notes• Options PS-0008, CI-0001 and CI-0004 are only available for Q32 frames
Control PanelsEnhance the function and usability of this router with a variety of control panels
CI-0001Sub-module that enables a second RS232/422 serial port
CI-0004Multi Q-Link Card - Fits inside frame to add up to three Q-Link ports and one RS232/422 port
AK-0002Rear frame support kit for Q16, strongly recommended for mobile applications
AK-0006D50 Mating Audio Connectors, all male type, one required for each group of 16 inputs or outputs
AK-000816 way XLR Breakout Panel, Male, 1RU. Includes 3m flying lead with D50 connector pre-wired for connection to Quartz audio routers, inputs or outputs
AK-000916 way XLR Breakout Panel, Female, 1RU. Includes 3m flying lead with D50 connector pre-wired for connection to Quartz Audio routers inputs or outputs