X-0601H-444 & X-0601H-444-AES4
6x1 HDTV Dual Link Router With Quad 6x1 AES Audio
The X-0601H-444 HDTV six input video router provides a convenient, low cost way to route dual link 1.5Gb/s HDTV serial digital signals. When the unit is ordered with the 6x1 AES router option the AES output busses can be used in an "audio follow video" mode, or can be broken away from the video buss. The routers feature redundancy protection by providing dual power supply and bypass relay options.
The router electronics are housed in a 1RU rackmount frame and is controlled from the built-in front panel controls. Each model can also be purchased with an optional rack mounted remote control panel that replaces the built-in control panel. All units can also be controlled by contact closures on the GPI control port or through the RS-232 serial remote control port using industry standard switcher protocols.
Features
- Supports dual link SMPTE 372M and single link SMPTE 292M (1.5Gb/s) video signals
- Can be operated in a non-reclock mode to pass SMPTE 259M video signals
- Optional SoftSwitch™ technology eliminates hot-switch audio pops on AES outputs
- Switch line is fully controllable from the front panel
- Video input presence detection displayable on the front panel
|
- Front panel or remote control panel versions available. Second control panel can be ordered for either version
- Parallel GPI and RS-232 serial control
- Programmable source input names available on the front panel
- Optional video and audio input relay bypass for power failure bypass protection
- Optional dual power supplies
- Field upgradeable firmware as new features become available
|
Specifications
| Standard | SMPTE 372M dual link (1.5Gb/s) or 292M (1.5Gb/s),SMPTE 259M with reclocker and embedded SoftSwitch™ turned off |
| Number of Inputs | 6 dual link pairs |
| Connector | BNC per IEC 61169-8 Annex A |
| Equalization | Automatic up to 100m @ 1.485Gb/s with Belden 1694 cable (or equivalent), 50m on input 1 with +HBP option |
| Return Loss | > 15dB up to 1.5Gb/s |
| Standard | Same as input |
| Number of Outputs | 2 dual link pairs; Input 1 bypass protected with +HBP option |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise/Fall Time | 200ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | > 15dB up to 1Gb/s, > 12dB up to 1.5Gb/s |
| Wideband Jitter | < 0.2UI |
| Standard | SMPTE 276M single ended AES |
| Number of Inputs | 6 per bus, 4 busses optional |
| Connector | BNC per IEC 61169-8 Annex A on breakout panels provided |
| Standard | SMPTE 276M single ended AES |
| Number of Outputs | 2 per bus, 4 busses optional; Input 1 bypass protected with +HBP option |
| Connector | BNC per IEC 61169-8 Annex A on breakout panels provided |
| Signal Level | 1V p-p |
| Reference | From Video Genlock Reference; |
| Type | Menu selectable - depends on video format - HD Tri-level Sync - NTSC or PAL Colour Black 1V p-p - Composite Bi-level Sync (525i/59.94 or 625i/50) 300mV |
| Number of Connectors | 2 |
| Connector | BNC per IEC 61169-8 Annex A |
| Termination | High impedance loop through |
| Number of Inputs | 14 opto-isolated, programmable functions |
| Number of Outputs | 4 sets of relay contacts, normally closed, programmable functions |
| Relay Max Current | 1A at 30V DC |
| Standard | RS-232 or RS-422 |
| Baud Rate | Programmable |
| Connector | 9 pin female "D" |
| Protocol | GVG Ten XL ASCII, master or slave or Remote Control Panel |
| Power | Auto ranging 100-240V AC, 50/60Hz 40 Watts |
| Fuse | 250V, 1A time delay |
| Safety | ETL Listed, Complies with EU Safety Directive |
| EMI/RFI | Complies with FCC Part 15 Class A, EU EMC Directive |
| Dimensions | 19" W x 1.75" H x 18.75" D (483mm W x 45mm H x 477mm D) |
| Weight | 8lbs. (3.5kg) |
Ordering Information
| X-0601H-444 | 6x1 Dual Link HDTV router |
| X-0601H-444-AES4 | 6x1 Dual Link HDTV router with 4 (6x1) AES busses (includes 1 AES breakout panel) |
| Notes | • When ordering the -AES4 version, one of options +B or +U must be selected |
| +HBP | Bypass relay |
| +2PS | Redundant power supply |
| +RCP | Rackmount remote control panel (replaces front control panel) |
| +B | Balanced AES Audio Breakout Panel |
| +U | Unbalanced AES Audio Breakout Panel |
| X-0601H-444-PANEL | Additional Remote Control Panel (works in addition to front control panel) |
| X-0601ABO | Unbalanced AES Audio Breakout Panel |
| X-0601ABOB | Balanced AES Audio Breakout Panel |
| X-0601ABOB-BP | Balanced AES Audio Breakout Panel with Bypass Relays |
| X-0601ABO-BP | Unbalanced AES Audio Breakout Panel with Bypass Relays |